User guide
Table Of Contents
- PJD5122_5211_5221_5231-en.pdf
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Hiding the image
- Locking control keys
- Freezing the image
- Operating in a high altitude environment
- Personalizing the projector menu display
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
Operation42
Function Description
Lamp
Settings
Lamp Mode
See "Setting Lamp mode as Economic" on page 44 for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 48 for details.
Equivalent Lamp Hour
S
ee "Getting to know the lamp hour" on page 44 for details
on how the total lamp hour is calculated.
Security
Settings
See "Utilizing the password function" on page 22 for details,
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User
1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings.
Current
System
Status
Source
Shows the current signal source.
Color Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format, NTSC, PAL, SECAM, or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu
Downloaded From projector-manual.com Viewsonic Manuals