User guide

18ViewSonic PJ658D
Adjusting the Projected Image
Adjusting the Projector Height
The projector is equipped with an elevator foot to adjust the image height. To raise or
lower the image:
1. Turn the projector over and locate the elevator foot. Press the elevator button to
extend the foot so it may be adjusted.
2. While holding down the elevator button, adjust the foot to the desired height, then
release the button to lock the elevator foot into position.
3. Use tilt-adjustment foot to ne-tune tilt-adjustment.
4. Lower the projector so it rests on its foot; adjust as needed.
To avoid damaging the projector, make sure that the elevator foot and tilt-
adjustment foot are fully retracted before placing the projector in its carrying
case.
2
3
3
Elevator button Elevator foot
Tilt-adjustment foot
Downloaded From projector-manual.com Viewsonic Manuals