User guide
ViewSonic PJ658D17
Please wait until the fan motor and the Lamp LED turn off before removing
the AC power cord from the projector.
Powering Off the Projector:
1. Press button to turn off the projector lamp. You will see a message “Press Power
Button to Turn Off Projector. Projector must cool down for 90 seconds before
unplugging or restarting.” appear on the screen.
2. Press
button again to conrm.
3. The cooling fans continue to operate for cooling
cycle and the Lamp LED goes out.
When the Power LED begins ashing, the projector
has entered standby mode.
If you wish to turn the projector back on, you must
wait until the projector has completed the cooling
cycle and has entered standby mode. Once in
standby mode, simply press
button to restart
the projector.
4. Turn off the main power switch.
5. Disconnect the power cord from the electrical
outlet and the projector.
6. Do not turn on the projector immediately
following a power off procedure.
Downloaded From projector-manual.com Viewsonic Manuals