User guide

16ViewSonic PJ658D
Powering On/Off the Projector
Powering on the projector:
1. Remove the projector lens cap.
2. Complete the AC power cord and peripheral signal cable(s) connections.
3. Turn on the main power switch.
4. Press
button to turn on the projector.
5. Turn on your source (computer, notebook, DVD,
etc.). The projector automatically detects your
source.
 “Source Found” message will appear on
the screen when the source is detected,
otherwise “For best image quality, lower
image resolution.” message will appear on
the screen.
 When “Searching” message appears on
the screen, ensure that the appropriate
signal cable(s) are securely connected.
 If you are connecting multiple sources to
the projector simultaneously, press
Source
button.
Warning:
 Remove the lens cap rst before powering on.
 Never look into the lens when the lamp is on. This can damage your eyes. It
is especially important that children are not allowed to look into the lens.
Downloaded From projector-manual.com Viewsonic Manuals