Service manual

4
ViewSonic Corporation Confidential - Do Not Copy PJ513D-1
4.3 Palletization
72 units by Air;
108 units (pallet A)/72 units (pallet B) by sea
2232 units/40’ container, or 1080 units /20’ container
5.0 Thermal Specification
Mechanical component temperature at ambience 0~40℃
5.1 Surface held or touched for short
periods
Normal surface:
Metal < 60°C except screws & terminals
Plastic<65°C except around ventilation (for this model only)
Screw and terminals <55°C
Metal Plastic
5.2 Surface which may be touched
<70°C <95°C
5.3 Exhaust Air
<95°C around ventilation holes
6.0 Environmental
Operating
0~40°C, without condensation
6.1 Temperature
Storage -20~60°C, without condensation
Operating 10~90%RH, without condensation
6.2 Humidity
Storage 10~90%RH, without condensation
Typical
Normal mode: 32dBA @ 25°C
Eco mode: 28dBA @ 25°C
6.3 Audible Noise Level
Maximum
Normal mode: 34BA @ 25°C
Eco mode: 30dBA @ 25°C
6.4 Altitude
Operating:
0~6000ft,25°C±5°C
6000ft~10000ft, 25°C±5°C must be operational and the reliability decrease
is acceptable (not guarantee Power, Ballast, DMD and lamp life)
Storage:
0 to +40000ft sea level(-20 °C to 30°C)
Max altitude in 60°C :0-6500ft
Max temperature in 10000ft:53°C
Safety
CB, CSA, TUV-GS, CCC, PSB, NOM, Korean-eK, Gost-R,
Hygiene, SASO, TUV-Argentina, Ukraine, CE
EMC FCC Class B requirements, CE
7.0 Regulatory
ESD Qisda ESD Specification
8.0 Reliability
8.1 MTBF 40000 hours except DMD chip, Color wheel, Lamp and Ballast
8.2 Lamp Lifetime
Normal : 2000 hours (50% brightness maintenance)
Eco: 3000 hours
9.0 Power Requirements Adhere to Appendix 3.5
9.1 Power Supply (Normal) VAC 90 – 264 Auto-switch (50/60Hz), 3 Wire Grounded
Typical 260 W Max.
9.2 Power consumption
Standby 5W Max.