Service manual

54
ViewSonic Corporation Confidential - Do Not Copy PJ513D-1
10.8-1 Assemble Thermal pad and Hest-sink
10.8-2 Fasten “Assy spring screw” Sequence as blow (Fig.10-8)
Pre-fastening Sequence: [ 1 ] - [ 2 ]
Fastening Sequence [ 2 ] - [ 1 ]
Screw Torque must be confirmed to be 6 kg-cm.
Fig. 10-8
10.9 Assemble Lamp Module and fasten screw (Fig. 10-9)
1
2