User guide

Multifunctional settings
SETUP menu
Item Description
ZOOM
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large

Small
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data

Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• When the V:INVERT or the H&V:INVERT is selected under the
item MIRROR, if the projector screen is inclined or if the projector is
angled downward, this function may not work correctly.
WHISPER
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL

WHISPER
• When the WHISPER is selected, acoustic noise and screen bright-
ness are reduced.
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL

H:INVERT

V:INVERT

H&V:INVERT
VOLUME
Using the buttons ▲/▼ adjusts the volume.
High

Low
With the SETUP menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
MENU
[
RGB
]
:SELECT
ZOOM
KEYST
ONE
WHISPER
MIRROR
VOLUM
E
100
+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
34ViewSonic PJ400