ViewSonic ® PJ1158 LCD Projector - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Guia do usuário - Användarhandbok - Käyttöopas - Руководство пользователя - 使用手冊 - 使用手冊 Model No. : VS11459 Downloaded From projector-manual.
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright © ViewSonic® Corporation, 2006. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Projector PJ1158 User's Manual – Operating Guide Contents of package (1) Projector (2) Remote control with two AA batteries (3) Power cord (4) RGB cable (5) Audio/Video cable (6) Quick Start Guide and ViewSonic Wizard CD (7) Lens cover, Rivet and Strap VIDEO RGB ASPECT MAGNIFY ON OFF SEARCH AUTO HOME PAGE UP END PAGE DOWN FREEZE BLANK VOLUME MUTE KEYSTONE MENU POSITION ENTER ESC (1) RESET (2) (5) (3) (6) (4) (7) NOTE • Keep the original packing materials for fut
Content Content About this manual. . . . . . . . . . . . . . . 1 Content. . . . . . . . . . . . . . . . . . . . . . . 2 Projector features. . . . . . . . . . . . . . . 3 Preparations. . . . . . . . . . . . . . . . . . . 3 Contents of package. . . . . . . . . . . . . . . . . . . 3 Fastening the lens cover. . . . . . . . . . . . . . . . 3 Part names. . . . . . . . . . . . . . . . . . . . 4 Projector. . . . . . . . . . . . . . .
Projector features / Preparations Projector features This projector is used to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. Preparations Contents of package Please see the “Contents of package” in the “User’s Manual (concise)” which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing.
Part names Part names Projector (1) Speakers (x 4). (2) Focus ring (3) Zoom ring (4) Lamp cover The lamp unit is inside. (5) Lens shift cover (6) Horizontal lens shift dial (7) Vertical lens shift dial (8) Front cover (9) Lens (10) Lens cover (11) Remote sensors (x 3) (12) Elevator feet (x 2) (13) Elevator knobs (x 2) (14) Filter cover The air filter and intake vent are inside.
Part names Control panel (1) STANDBY/ON button (2) MENU button It consists of four cursor buttons. (3) INPUT button (4) POWER indicator (5) TEMP indicator (6) LAMP indicator (6) (5) (4) SD CARD RGB OUT Rear panel AUDIO IN 1 AUDIO IN 2 S-VIDEO RGB1 Y VIDEO RGB2 M1-D CB/PB (1) R LAN AUX I/O DC 5V 0.5A SD CARD AUDIO IN 3 CR/PR L R L AUDIO IN 4 (2) (3) REMOTE CONTROL (3.
Part names Remote control (1) Laser pointer It is a beam outlet. (2) LASER INDICATOR (3) LASER button (4) STANDBY/ON button (5) VOLUME button (6) MUTE button (7) VIDEO button (8) RGB button (9) SEARCH button (10) AUTO button (11) ASPECT button (12) POSITION button (13) KEYSTONE button (14) MAGNIFY - ON button (15) MAGNIFY - OFF button (16) FREEZE button (17) BLANK button (18) MY BUTTON - 1 button (19) MY BUTTON - 2 button (20) MENU button (21) Lever switch : acting 3 functions as below.
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand.
Setting up Arrangement Refer to the illustrations and tables below to determine screen size and projection distance.
RGB OUT VIDEO RGB1 Y RGB2 M1-D CB/PB Setting up CR/PR Adjusting the projector's elevator REMOTE When the place to put the projector is slightly uneven to the left or right, use the CONTROL AUDIO S-VIDEO (3.5Φ) R L R L elevator feet to place the projectorOUT horizontally. CONTROL AUDIO IN 3 AUDIO IN 4 Using the feet can also tilt the projector in order to project at q a suitable angle to the screen, elevating the front side ofACthe IN projector within 8 degrees.
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Do not connect LAN port to any network that might have the excessive voltage. - Some signal may need an adapter to input this projector.
Setting up Connecting power supply 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC inlet Connector of the power cord to the outlet WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.
Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. LASER INDICATOR LASER button WARNING ►The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems.
Remote control About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the “REMOTE RECEIV” in the SERVICE item of OPTION menu. Each sensor senses the signal within the following range when the sensor is active. The front and top sensors: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.
RGB OUT AUDIO IN 1 AUDIO IN 2 RGB1 Y VIDEO RGB2 M1-D CB/PB CR/PR S-VIDEO R AUDIO IN 3 L Remote control REMOTE CONTROL (3.5Φ) AUDIO OUT R L AUDIO IN 4 CONTROL Using as a wired remote control LAN AC IN LASE INDIC R ATOR The accessory remote control works as a wired remote control, when the wired control port at the bottom of the remote control connects with the REMOTE CONTROL port on the back of the projector via an audio cable with 3.5 diameter stereo mini plugs.
Power on/off Power on/off Turning on the power sure that the power cord is firmly and cor1. Make rectly connected to the projector and the outlet. the lens cover, and set the power switch to 2. Remove the ON position. STANDBY/ON button POWER indicator LASER INDICATOR STANDBY/ON VIDEO BLANK RGB The power indicator will light up in steady orange. Then wait several seconds because the buttons may not function for these several seconds.
BLANK LASER Operating LASER INDICATOR Operating STANDBY/ON VIDEO RGB ASPECT Adjusting the volume the VOLUME button on the remote control. 1. Press A dialog will appear on the screen to aid you in adjusting the volume. the cursor buttons ▲/▼ to adjust the volume. 2. Use To close the dialog and complete the operation, press the PUSH ENTER PAGE UP BLANK ESC PAGE DOWN LASER RESET MENU POSITION AUTO MAGNIFY MY BUTTON ON 1 VOLUME VOLUME button again.
LASER INDICATOR Operating STANDBY/ON VIDEO Selecting an input signal (continued) 1. RGB LASER INDICATOR Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below.
Operating Adjusting the zoom and focus 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. Adjusting the lens shift 1. Use the vertical lens shift dial to shift the picture upward or downward. the horizontal lens shift dial to 2. Use shift the picture left or right.
Operating ASPECT Adjusting the position PUSH 1. 2. ENTER Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen. Use the cursor buttons ▲/▼/◄/► to adjust the picture position. When you want to reset the operation, press the RESET button on the remote control during the operation. To complete this operation, press the POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
ASPECT PUSH Using the magnify feature Operating ENTER PAGE UP the ON button of MAGNIFY on the remote control. 1. Press The “MAGNIFY” indication will appear on the screen (al- though the indication will disappear in several seconds with no operation), and the projector will go into the MAGNIFY mode. PAGE DOWN ESC MENU POSITION AUTO RESET MAGNIFY MY BUTTON ON 1 VOLUME MUTE the cursor buttons ▲/▼ to adjust the zoom level. 2.
Operating LASER INDICATOR STANDBY/ON VIDEO RGB Temporarily blanking the screen Press the BLANK button on the remote control. 1. The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in SCREEN menu. To exit from the blank screen and return to the input signal screen, press the BLANK button again.
Operating LASER INDICATOR STANDBY/ON Using the menu function VIDEO RGB This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, and EASY MENU. EASY MENU consists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. BLANK LASER ENTER button ASPECT PUSH Cursor buttons MENU button RESET button 1.
EASY Menu '#5; /'07 =4)$ ? EASY Menu From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. Item #52'%6 #761 -';5610' ':'%76' -';5610' -';5610' 2+%674' /1&' 014/#. $4+)*60'55 %1064#56 %1.14 6+06 5*#420'55 9*+52'4 014/#. /+4414 014/#. 4'5'6 (+.6'4 6+/' J .#0)7#)' '0).
EASY Menu EASY Menu (continued) Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR RESET FILTER TIME LANGUAGE Go to Advanced Menu... Description Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu. Using the ◄/► buttons adjusts the contrast. See the CONTRAST item in PICTURE menu. Using the ◄/► buttons adjusts the strength of whole color. See the COLOR item in PICTURE menu. Using the ◄/► buttons adjusts the tint. See the TINT item in PICTURE menu.
PICTURE Menu PICTURE Menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 5'.
PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode.
PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó TURN OFF Feature ACTIVE IRIS PRESENTATION The active iris displays the best presentation image for both bright and dark scenes. THEATER The active iris displays the best theater image for both bright and dark scenes. TURN OFF The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected.
IMAGE Menu IMAGE Menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item ASPECT OVER SCAN V POSITION H POSITION /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 5'.
IMAGE Menu IMAGE Menu (continued) Item H PHASE H SIZE AUTO ADJUST EXECUTE Description Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for an RGB signal or a component video signal. (except 525i (480i), 625i (576i), SCART RGB) Using the ▲/▼ buttons adjusts the horizontal size. Large ó Small • This item can be selected only for an RGB signal. • When this adjustment is excessive, the picture may not be displayed correctly.
INPUT Menu INPUT Menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 5'.'%6 241)4'55+8' 68 8+&'1 04 /+& & ;%5 56+.. %1.
INPUT Menu INPUT Menu (continued) Item Description Using the ▲/▼ buttons switches the function of the COMPONENT (Y, Cb/Pb, Cr/Pr) port. COMPONENT ó SCART RGB When the SCART RGB is selected, the COMPONENT (Y, Cb/Pb, Cr/Pr) and VIDEO ports will function as a SCART RGB port. A SCART adapter or SCART cable is required for a SCART RGB input to the projector. For details, contact your dealer.
INPUT Menu INPUT Menu (continued) Item FRAME LOCK RGB IN Description Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Set the RGB input signal type for the RGB port.
INPUT Menu INPUT Menu (continued) Item Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. 4'51.76+10 (2) In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
SETUP Menu SETUP Menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. Item AUTO KEYSTONE EXECUTE KEYSTONE KEYSTONE /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 5'.
SETUP Menu SETUP Menu (continued) Item Description WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm will be displayed when projector is restarted after the power switch is turned off.
AUDIO Menu AUDIO Menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 81.7/' 64'$.' $#55 545 919 52'#-'4 #7&+1 5'.
SCREEN Menu SCREEN Menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. Item /'07 =4)$ ? 2+%674' +/#)' +0276 5'672 #7&+1 5%4''0 126+10 0'6914 '#5; /'07 5'.'%6 .#0)7#)' '0).+5* /'07 215+6+10 $.
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature START UP MyScreen Screen can be registered by the MyScreen item. ORIGINAL Screen preset as the standard screen. TURN OFF Plain black screen.
SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.
SCREEN Menu SCREEN Menu (continued) Item MESSAGE SOURCE NAME Description Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching….” while searching for the input “Detecting….
OPTION Menu OPTION Menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
OPTION Menu OPTION Menu (continued) Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO OFF LAMP TIME FILTER TIME AUTO OFF ENABLE AUTO OFF DISABLE 1 0 When the time is set to 0, the projector is not turned off automatically.
OPTION Menu OPTION Menu (continued) Item MY BUTTON Description This item is to assign one of the following function to MY BUTTON 1 and 2 on the remote control. Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button. • RGB1: Sets port to RGB1. • RGB2: Sets port to RGB2. • M1-D: Sets port to M1-D. • COMPONENT: Sets port to COMPONENT (Y, Cb/Pb, Cr/Pr). • S-VIDEO: Sets port to S-VIDEO. • VIDEO: Sets port to VIDEO.
OPTION Menu OPTION Menu (continued) Item Description AUTO ADJUST Using the ▲/▼ buttons enables/disables the automat#761 #&,756 ic adjustment.When DISABLE is selected, the auto'0#$.' &+5#$.' matic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting. ENABLE ó DISABLE • Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly.
OPTION Menu OPTION Menu (continued) Item Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. SERVICE REMOTE RECEIV. (1) Select a remote sensor using the ▲/▼ button.
OPTION Menu OPTION Menu (continued) Item Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD SECURITY 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 5201. This PASSWORD can be changed (1.2 Changing the PASSWORD).
OPTION Menu OPTION Menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX. 1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code will be displayed.
OPTION Menu OPTION Menu (continued) Item Description 2.2-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the ► /[5ETGGP button to display the PASSWORD for about %1/2.'6' 20 seconds, please make note of the PASS WORD during this time. '06'4 ':+6 Pressing the ENTER button on the remote conPASSWORD BOX trol or INPUT button on the projector will return to MyScreen PASS WORD on/off menu.
OPTION Menu OPTION Menu (continued) Item SECURITY Description 3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/► /RGB and INPUT buttons. 2+0 $1: +PRWV 2+0 %QFG A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code 4)$ registration. PIN BOX NOTE: If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATION BOX are displayed the menu will close.
OPTION Menu OPTION Menu (continued) Item Description 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.
OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu. If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 4.3-1. SECURITY 4.4 If you have forgotten your PASSWORD 4.
NETWORK Menu NETWORK Menu Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause trouble on the network. Select “NETWORK” from the main menu to access the following functions. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item.
NETWORK Menu NETWORK Menu (continued) Item TIME DIFFERENCE Description Entering the TIME DIFFERENCE : Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your PC. If unsure, consult your network administrator. Use the ◄ button to return to the menu after setting the TIME DIFFERENCE. 6+/' &+(('4'0%' 㪞㪤㪫㩷㩷㪇㪇㩷㪑㪇㩷 㪇㩷 DATE AND TIME Entering DATE AND TIME : Use the ▲/▼/◄/► buttons to enter the Year (last two digits), Month, Date, Hour and Minute.
NETWORK Menu / Network functions NETWORK Menu (continued) Item Description INFORMATION display : Use the ► or ENTER buttons to view network information and confirm settings. INFORMATION 0'6914- + 0(14/#6+10 0#/' +2 #&&4'55 57$0'6/#5- &'(#7.6 )#6'9#; /#% #&&4'55 #% % 6+/' &+(('4'0%' )/6 ' #0& 6+/' • Only the first 16 characters of the projector name are displayed.
Network Functions Network Functions This projector is equipped with the following network functions. Configuring and Controlling the Projector via a Web Browser You can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. Failure & Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error.
Network Functions Before using the network functions… To use the network functions of this projector, the projector must be configured to suit your network. Consult with your network administrator before connecting the projector to your network. Incorrect network configuration of this projector may cause problems on your network.
Network Functions Configuring and controlling the projector via a web browser You can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. NOTE • Internet Explorer 5.5 or higher or Netscape 6.2 or higher are required. • If JavaScript is disabled in your web browser configuration, you must enable JavaScript in order to use the projector web pages properly. See the Help files for your web browser for details on how to enable JavaScript.
Network Functions Configuring and controlling the projector via a web browser (Continued) When configuring or controlling the projector via a web browser, an ID and password are required. There are two types of IDs, Administrator IDs and User IDs. The following chart describes the differences between user and administrator IDs. Item Description Administrator ID User ID Displays the projector’s current netNetwork Information √ √ work configuration settings.
Settings Settings Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector isFig. set1to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser and the screen in Fig. 1 will be displayed. 2) Enter your ID and password and click [Logon]. If the logon is successful either the Fig.2 or Fig.3 screen will be displayed. Fig. 2 (Logon with administrator ID) Fig.
Settings Network Information All screen images displayed in this manual are screens of a logon using an administrator ID. Any administrator only functions will not be displayed when using a user ID. Refer to the descriptions in each table. Displays the projector’s current network configuration settings. Item DHCP IP Address Subnet Mask Default Gateway MAC Address Firmware Date Firmware Version Description Displays the DHCP configuration settings. Displays the current IP address. Displays the Subnet Mask.
Settings Network Settings Displays and configures network settings. Item IP Configuration DHCP ON DHCP OFF IP Address Subnet Mask Default Gateway Description Configures network settings. Enables DHCP. Disables DHCP. Configures the IP address when DHCP is disabled. Configures the Subnet Mask when DHCP is disabled. Configures the Default Gateway when DHCP is disabled. Projector Name SysLocation Configures the Projector name. Configures the location to be referred to when using SNMP.
Settings Port Settings Displays and configures communication port settings. Item Network Control Port1 (Port:23) Port open Authentication Network Control Port2 (Port:9715) Port open Authentication Image Transfer Port (Port:9716) Port open Authentication SNMP Port Port open Trap address SMTP Port Port open Description Configures command control port 1 (Port:23). Click the [Enable] check box to use port 23. Click the [Enable] check box when authentication is required for this port.
Settings Mail Settings Displays and configures e-mail addressing settings. Item Send Mail SMTP Server IP Address Sender E-mail address Description Click the [Enable] check box to use the e-mail function. Configure the conditions for sending email under [Alert Settings]. Configures the address of the mail server in IP format. Configures the sender e-mail address. The length of the sender e-mail address can be up to 255 alphanumeric characters. Configures the e-mail address of up to five recipients.
Settings Alert Settings Displays and configures failure & warning alerts. Item Cover Error SNMP Trap Send Mail Mail Subject Mail Text Fan Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Cover Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [Enable] check box to enable e-mail alerts for this item. Configures the subject line of the e-mail to be sent. The length of the subject line can be up to 255 alphanumeric characters.
Settings Alert Settings (Continued) Item Lamp Error SNMP Trap Send Mail Mail Subject Mail Text Temp Error SNMP Trap Send Mail Mail Subject Mail Text Air Flow Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Lamp Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [Enable] check box to enable e-mail alerts for this item. Configures the subject line of the e-mail to be sent.
Settings Alert Settings (Continued) Item Lamp Time Error SNMP Trap Send Mail Mail Subject Mail Text Cool Error SNMP Trap Send Mail Mail Subject Mail Text Filter Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Lamp Time Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [Enable] check box to enable e-mail alerts for this item. Configures the subject line of the e-mail to be sent.
Settings Alert Settings (Continued) Item Other Error SNMP Trap Send Mail Mail Subject Mail Text Description Configures Other Error alert settings. Click the [Enable] check box to enable SNMP Trap alerts for this item. Click the [Enable] check box to enable e-mail alerts for this item. Configures the subject line of the e-mail to be sent. The length of the subject line can be up to 255 alphanumeric characters. Configures the text of the e-mail to be sent.
Settings Alert Settings (Continued) Item Description Filter Time Alarm Configures Filter Time Alarm alert settings. Alarm Time SNMP Trap Send Mail Mail Subject Mail Text Transition Detector Alarm SNMP Trap Send Mail Mail Subject Mail Text “CHANGE THE LAMP” is displayed SNMP Trap Send Mail Mail Subject Mail Text Cold Start SNMP Trap Authentication Failure SNMP Trap Configures the filter time to alert. Click the [Enable] check box to enable SNMP Trap alerts for this item.
Settings Schedule Settings Displays and configures schedule settings. Item Daily Schedule Schedule List Sunday Schedule Schedule List Monday Schedule Schedule List Tuesday Schedule Schedule List Wednesday Description Configures the daily schedule. Click the [Enable] check box to enable daily scheduling. Displays the current daily schedule. Configures the Sunday schedule. Click the [Enable] check box to enable Sunday scheduling. Displays the current Sunday schedule. Configures the Monday schedule.
Settings Schedule Setting (Continued) Item Specific date No1 Description Configures the specific date (No.1) schedule. Schedule Click the [Enable] check box to enable specific date (No.1) scheduling. Month/Day Schedule List Configures the Month and date. Displays the current specific date (No.1) schedule. Specific date No.2 Configures the specific date (No.2) schedule. Schedule Click the [Enable] check box to enable specific date (No.2) scheduling.
Settings Schedule Setting (Continued) To add additional functions and events click the [Add] button and set the following items. Item Time Command Description Configures the time to execute commands. Configures the commands to be executed. Power Parameter Configures the parameters for power control. Input Source ParamConfigures the parameters for input switching. eter Display Image ParamConfigures the parameters for display of transfer image data.
Settings Date/Time Settings (Continued) Item Daylight Savings Time Start Configures the date and time daylight savings time begins. Month Configures the month daylight savings time begins (1~12). Week Configures the week of the month daylight savings time begins (First, 2, 3, 4, Last). Day Configures the day of the week daylight savings time begins (Sun, Mon, Tue, Wed, Thu, Fri, Sat). Hour Minute Configures the hour daylight savings time begins (0 ~ 23).
Settings Security Settings Displays and configures passwords and other security settings. Item Administrator authority Administrator ID Administrator Password Description Configures the Administrator ID and Password. Configures the Administrator ID. The length of the text can be up to 32 alphanumeric characters. Configures the Administrator Password. The length of the text can be up to 255 alphanumeric characters. Re-enter Administrator Re-enter the above password for verification.
Settings Security Settings (Continued) Item Network Control Description Configures the Authentication Password for the command control. Authentication Password Configures the Authentication Password. The length of the text can be up to 16 alphanumeric characters. Re-enter Authentication Password Used to re-enter the above password for verification. SNMP Community Name Configures the community name if SNMP is used. Configures the community name.
Projector Control Projector Control Projector Control The items shown in the table below can be performed using the [Projector Control] menu. Select an item using the up and down arrow keys on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector. Item Description Main Power Input Source Picture Mode Blank On/Off Mute Freeze Magnify Turns the power On/Off. Selects the input source. Selects the Picture Mode setting. Turns Blank On/Off. Turns Mute On/Off.
Projector Control Projector Control (Continued) Item Description Image Aspect Over Scan V Position H Position H Phase H Size Auto Adjust Selects the Aspect setting. Selects the Over Scan setting. Adjusts the V Position. Adjusts the H Position. Adjusts the H Phase. Adjusts the H Size. Performs Auto Adjustment. Input Progressive Video NR 3D-YCS Color Space Component C-Video Format S-Video Format M1-D Frame Lock RGB in-1 RGB in-2 Selects the progressive setting. Selects the Video NR setting.
Projector Control Projector Control (Continued) Item Description Audio Volume Adjusts the Volume setting. Treble Adjusts the Treble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting. Speaker Turns Speaker On/Off. Audio-RGB1 Assigns the Audio-RGB1 input terminal. Audio-RGB2 Assigns the Audio-RGB2 input terminal. Audio-M1-D Assigns the Audio-M1-D input terminal. Audio-Video Assigns the Audio-Video input terminal.
Projector Control Projector Status Displays and configures the current projector status. Item Error Status Lamp Time Filter Time Power Status Input Status Blank On/Off Mute Freeze Description Displays the current error status Displays the usage time for the current lamp. Displays the usage time for the current filter. Displays the current power status. Displays the current input signal source. Displays the Blank On/Off status. Displays the current Mute On/Off status.
Failure & Warning Alerts via E-mail Failure & Warning Alerts via E-mail The projector can automatically send an alert to specified e-mail addresses when the projector requires maintenance or has encountered an error. NOTE • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector suddenly loses power. Mail Settings To use the projector’s e-mail function please configure the following items via a web browser.
Failure & Warning Alerts via E-mail Mail Settings (Continued) 8) C onfigure the Failure/Warning Alerts via E-mail settings. Click [Alert Settings] on the main menu. 9) Select and configure each alert item. Refer to [Alert Settings] in [Configuring and Controlling the Projector via a Web Browser] for further information. 10) Click the [Apply] button to save the settings.
Projector management via SNMP Projector management via SNMP When SNMP is enabled, the projector is able to send Failure/Warning Alerts to a specified PC. NOTE • It is recommended that SNMP functions be carried out by a network administrator. • SNMP management software must be installed on the computer to monitor the projector via SNMP. SNMP settings Configure the following items via a web browser to use SNMP. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.
Controlling the Projector via Scheduling Controlling the Projector via Scheduling The projector can be automatically controlled via scheduling. NOTE • You can schedule the following control events: Power ON/OFF, Input Source and Transferred Image Display. • There are 3 types of Scheduling, 1) daily 2) day of the week 3) specific date. • The priority for scheduled events is as follows 1) specific date 2) day of the week 3) daily. • Up to five specific dates are available for scheduled events.
Controlling the Projector via Scheduling Date/Time Settings The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser. Enter the Administrator ID and Password and click [Logon]. 2) Click [Date/Time Settings] on the main menu and configure each item.
Controlling the Projector via Scheduling Schedule Settings Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter [https://192.168.1.10] into the address bar of the web browser. 2) Enter the Administrator ID and Password and click [Logon]. 3) Click [Schedule Settings] on the main menu and select the required schedule item. 4) Click the [Enable] check box to enable scheduling.
e-SHOT (Still Image Transfer) Display e-SHOT (Still Image Transfer) Display The projector can display a still image that is transferred via the network. Communication Port The following port is used for e-SHOT. TCP #9716 NOTE • e-SHOT is not available via communication ports which are used for the command control (TCP #23 and TCP #9715). e-SHOT (Still Image Transfer) Settings Configure the following items from a web browser when e-SHOT is used.
e-SHOT(Still Image Transfer) Display e-SHOT (Still Image Transfer) Settings (Continued) When the authentication setting is enabled, the following settings are required. 6) Click [Security Settings] on the main menu. 7) Select [Network Control] and enter the desired authentication password. * see Note1 8) Click the [Apply] button to save the settings.
Command Control via the Network Command Control via the Network You can configure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 NOTE • Command control is not available via communication port (TCP #9716) that is used for the e-SHOT transmission function. Command Control Settings Configure the following items from a web browser when command control is used.
Command Control via the Network Command Control Settings (Continued) When the authentication setting is enabled, the following settings are required. 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See Note1. 9) Click the [Apply] button to save the settings. * See Note2.
Command Control via the Network Command format Command formats differ among the different communication ports. TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However, the following reply will be sent back in the event of authentication failure when authentication is enabled.
Command Control via the Network Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data.
Command Control via the Network Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled. The projector uses a challenge response type authentication with an MD5 (Message Digest 5) algorithm. When the projector is using a LAN, a random eight bytes will be returned if authentication is enabled.
Maintenance Maintenance Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = RLC-021 Replacing the lamp The lamp cover the projector off, and unplug the power cord.
Maintenance Lamp (continued) WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Maintenance Air filter Please check and clean the air filter periodically. If the air filter becomes clogged by dust or the like, internal temperatures rise, which could cause a fire, a burn or malfunction to the projector. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Note that the projector may shut down, when the projector heats too much. Please replace the air filter when it is damaged or too soiled.
Maintenance Air filter (continued) Turn the projector on and reset the filter time using the FILTER TIME item in the EASY MENU. 9. (1) Press the MENU button to display a menu. (2) Point at the “FILTER TIME” using the ▼/▲ button, then press the ► button. A dialog will appear. (3) Press the ▲ button to select “RESET” on the dialog. It performs resetting the filter time.
Maintenance Internal clock battery Consumption of the battery makes the clock not to work correctly. When the clock is wrong or it has stopped, please replace the battery according to the following procedures. 1. 2. 3. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing. Battery Cover Remove the battery cover.
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
Troubleshooting Troubleshooting Related messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please follow the instructions described below. If the same message is displayed after the remedy, or if a message other than the following appears, please contact your dealer or service company.
Troubleshooting Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please follow the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company.
Troubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description The cooling fan is not operating. Blinking In Red or Lighting In Red Turned off Blinking In Red Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation that no foreign matter has become caught in the fan, etc., and then turn the power on again.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The signal cables are not correctly connected. Correctly connect the audio cables. The MUTE function is working. Sound does not come out. Restore the sound pressing the MUTE or VOLUME button on the remote control. The volume is adjusted to an extremely low level. Adjust the volume to a higher level using the menu function or the remote control.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The brightness and/or contrast are adjusted to an extremely low level. Adjust BRIGHTNESS and/or CONTRAST settings to a higher level using the menu function. Pictures appear dark. The WHISPER function is working. Select NORMAL for the WHISPER item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp.
Warranty And After-Service / Specification Warranty and after-service If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied. Specification Item Specification Product name Liquid Panel size Crystal Drive system Panel Pixels Liquid crystal projector 2.0 cm (0.
Specifications 319 Specifications (continued) 154 139 418 [unit: mm] ViewSonic PJ1158 Downloaded From projector-manual.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. T=Telephone Country/ Region Web Site United States www.viewsonic.com/support/ Canada www.viewsonic.com/support T= 866 463 4775 service.ca@viewsonic.com United Kingdom www.viewsoniceurope.com/uk T= 0207 949 0307 service.eu@viewsoniceurope.com Europe, Middle East, Baltic countries, and North Africa www.viewsoniceurope.
Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
4. F or additional information or the name of the nearest ViewSonic service center, contact ViewSonic. 5. For applicable models with the PIN code security feature only. This projector contains a personal identification number (PIN) that restricts access to authorized users. If you forget to record the PIN code in the User Guide with your Serial Number, you will have to send in the unit for service so the code can be reset.
Downloaded From projector-manual.
