Specifications
Smart Panel Projector Driver Application Note
Viewsonic PJ1060
© 2003 SP Controls Inc. 601 Minnesota Suite 115, San Francisco, CA 94107
help@spcontrols.com
The hidden functions available for the Viewsonic with this Driver are as follows:
MENU
ADJ UP
ADJ DOWN
ADJ LEFT
ADJ RIGHT
ZOOM +
ZOOM –
FOCUS +
FOCUS –
POSITION
TIMER
BLANK
MUTE
RIGHT CLICK
LEFT CLICK
D. Relays
The following table specifies the factory preset
settings for the low-current relays found on the rear
of the Smart Panel. The Configuration Utility can
be used to customize these settings your installation.
Relay 1 ON Maintained
Relay 2 ON Momentary
Relay 3 OFF Momentary
Selection Momentary; not Binary
E. Other Presets
The following table specifies other default factory settings for this Driver that affect is control of the
Projector.
Power Status Feedback Method RS-232 Polling (see note 1)
Control Wiring Infrared Emitter (see note 2)
Control for the Viewsonic with this Driver is via both RS-232 and Infrared.
The following table specifies settings for the Panel’s configurable timers. For more information on the
inactivity shutdown feature and the lockout timer see the Smart Panel Configuration and Installation
Guide.
Lockout Timer 80 seconds (see note 3)
Inactivity Shutdown Disabled
RELAYS
PWR
ON
MAINT.
PWR
ON
MOM.
PWR
OFF
MOM.
1A
1B
3A
3B
2A
2B
4A
4B
6A
6B
5A
5B
7A
7B
SELECTION
(EXT. SWITCHER CTRL)
4321
500mA MAX. CURRENT