User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Using the CEC function
- Using the 3D functions
- Controlling the projector through a LAN environment
- Using the projector in standby mode
- Adjusting the sound
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
5
Controls and functions
Projector
•Power
Toggles the projector between standby
mode and Power ON.
HDMI port indicator
Lights up blue when an HDMI device is
inserted into the inner HDMI port.
•/ (Keystone keys)
Manually corrects distorted images
resulting from an angled projection.
• Left/ Right/ Up/ Down
Selects the desired menu items and makes
adjustments.
•Menu
Turns on the On-Screen Display (OSD)
menu.
•Exit
Goes back to previous OSD menu, exits
and saves menu settings.
•Enter
Enacts the selected On-Screen Display
(OSD) menu item.
•Color Mode
Selects an available picture setup mode.
• Source
Displays the source selection bar.
• (Help)
Displays the HELP menu by a long press
for 3 seconds.
Lens shift wheel
Focus and Zoom rings
Power indicator light
Lamp indicator light
Temperature indicator light