Technical information

In the LavaPort control panel, you should not have to change anything. If the setting do not match the
screen shot below, remove the software and reinstall the driver from the floppy drive and not the CD-ROM or
hard drive copy.
The LavaPort control panel after a proper installation
When the card is configured this way, Windows NT Ports control panel should have the following port set-
tings:
COM IRQ Address
1 4 3f8
2 3 2f8
3 Default Default
4 Default Default
Or like this for a single card:
COM IRQ Address
1 4 3f8
2 3 2f8
3 Default Default
Windows NT’s Port control panel The Advanced Settings
These cards maybe added individually to add one extra serial port. In order to ensure proper operation,
they need at least one slot between the two cards.
18
PCComplete Technical Information for Sable Techs/Installers