Technical information

7. Make sure all cables are connected and secure, then power on the computer, press and hold the “Delete”
key to enter BIOS.
8. Use the arrow keys to select “BIOS Features Setup” and press the “Enter” key. Use the arrow keys again to
select the “Quick Power On Test,” use the “Page Up” key to set it to “Disable”. Press “Esc” to return to the
main BIOS screen. Press “F10” to save and exit, confirm with “y” and press return.
9. Allow the computer to run through it’s tests and confirm that the processor still reads an AMD K6-2/333
and that the correct amount of RAM is displayed.
10. After the O/S loads and everything appears to be working correctly, restart the computer and enter the
BIOS again. Use the arrow keys to select “BIOS Features Setup” and press the “Enter” key. Use the arrow
keys again to select the “Quick Power On Test,” use the “Page Up” key to set it to “Enable”. Press “Esc” to
return to the main BIOS screen. Press “F10” to save and exit, confirm with “y” and press return.
9
revision 0.2.8.7