ViewSonic ® N3290w/N4290p/N4790p LCD TV ၬ手册 8VHU *XLGH ViewSonic® 0RGHO 1R 96 * 96 * 96 *
Contents Getting Started Package Contents ........................................................................................... 5 Mounting ViewSonic LCD TV to the wall......................................................... 5 Place the TV on a solid surface....................................................................... 6 Install the wall mount plate to the LCD TV....................................................... 6 Connecting the power.....................................................
Important Safety Instructions 1. 2. 3. 4. 5. 6. ENGLISH 7. 8. Read these instructions completely before using the equipment. Keep these instructions in a safe place. Heed all warnings. Follow all instructions. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions.
Copyright Information Copyright © ViewSonic ® Corporation, All rights reserved. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice.
Antenna Installation Instructions Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and req
Cleaning the LCD TV • Make sure the LCD TV is turned off. • Never spray or pour any liquid directly onto the screen or case. To clean the case: 1. Use a soft, dry cloth. 2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Disclaimer ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or case.
Getting Started Congratulations on your purchase of a ViewSonic® LCD TV. Important! Save the original box and all packing material for future shipping needs. ENGLISH Package Contents Your LCD TV package includes: • LCD TV • Power Cord • Warranty Card* • Remote Control with batteries • RF Cable • ViewSonic User Guide Mounting ViewSonic LCD TV to the wall The LCD TV can be used in a free standing position or wall-mounted.
Place the TV on a solid surface 2. 3. 4. 5. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. Leave at least 15cm around the TV set. Otherwise, air-circulation may be inadequate and cause overheating, which may cause a fire or damage to the TV set. Never place the TV set in hot, oily humid or excessively dusty places.
Turn the TV on & Off 1. Power On : Press the power button on the remote control or key to pad to turn it on. 2. Power Off : Press the power button on the remote control or key to pad to turn it on. ENGLISH 3. LED Indicator Lights up in blue : the TV is turned on. Lights up in red : the TV is in standby mode. Watching TV 1. Press the TV button on the remote control or press source button to select TV input. 2. Press the MENU button to display the OSD main menu. 3.
Overview the LCD TV & Connection ENGLISH The Front of the Screen Introduction Power(䶣ᄭ): Turn the power on from standby mode or turn the power off return to the standby mode. Source(ॾ㢆ᄭ): Press this button to display selected source, press button to select input source. Press this button to display or exit the OSD menu.
Signal Source Interface from Rear View ENGLISH You can connect numerous items of source equipment to your TV. The figure below shows you how to connect these. Place the TV on a table with the LCD screen facing down to facilitate easy connection with the external equipment. Please take precautionary measures to avoid damaging the LCD screen.
2. Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display. 3. In case no signal is detected from your HDMI device, turn off the HDMI device and then on again. 4.
ENGLISH Signal Source Interface from Side View (9) AV1 & S-Video1 Input: Connect the Video signal or S-Video cable to DVD player, Laser Disc player, videocassette recorder or camcorder (Note: For S-Video, Audio and AV1 are shared). Audio Input: Connect the audio signal source (PC, DVD player, Laser Disc player, videocassette recorder or camcorder) to the audio Input ports. (Note: S-Video2 & AV2 are shared same audio input).
To Use Remote Control POWER/⬉⑤ Press to turn on/off. Sleep/ⴵ With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from 15, 30, 45, 60, 90, 120 minutes. (PC mode did not support this function) HDMI To select HDMI/ PC input.
Remote Control Battery Installation ENGLISH Follow the steps below to insert batteries. 1. Open the remote control’s rear battery compartment cover. 2. Insert two AAA (1.5v) batteries. Ensure that the positive and negative ends match as indicated on the bottom of the battery compartment. 3. Replace the battery compartment cover. CAUTION 1. 2. 3. 4. 5. 6. Only use the specified AAA batteries. Do not mix new and old batteries.
OSD function All the functions for the LCD TV are control either by the remote control or the control button on the front control screen at bottom of right side. 1. Press the Menu button to display or exit the OSD main menu. 2. Use the Up or Down buttons to select the function to be adjusted. The function where the cursor is located is the selected one. 3. Use the Left or Right buttons to enter into the submenu, or to enable or adjust the selected function.
ENGLISH Picture Setting 1. Picture Mode: User can select User, Drama, DV, Sport & Movie if selected except User item, Contrast, brightness, Saturation, Sharpness, DNR, Backlight can’t adjust. 2. Contrast: Adjust black and white level, suitable contrast can make picture more lightly. Adjustment range is from 0 to 100DŽ 3. Brightness: Adjust background brightness, user can collocation it with contrast adjustment range is from 0 to 100. 4. Saturation: Adjust color saturation, range is from 0 to 100. 5.
ENGLISH Sound Setting 1. Volume: The Volume adjustment range is from 0 to 100, You can adjust the Volume of the picture to the level you prefer 2. Balance: Adjust the balance between left/right channels as required using the left / right buttons. 3. Smart Volume: To select the Automatic Volume Setup. 4. Sound Effect: You can choose your preferred sound effect mode. The selection including Off, News, Movie, Music, Surround, Stereo & User. 5.
ENGLISH Setup Setting 1. Language: This indicates the different languages available for the OSD menu, including Chinese, & English. The default is Chinese 2. Wide Mode: To select picture size. Includes 4 modes: Full, 4:3, 16:9, & 16:9 Subtitle. (The options of aspect ratio may be different according to its input source) 3. Sleep Timer: Use this button to set a time period after which the TV will enter into standby mode. The time period can be 0>15>30>45>60>90>120 minutes.
ENGLISH How to setup Start/Off Timer 1. 2. 3. 4. 5. 6. Time: Setup current time. Start Time: Setup turn on timer. Channel: Setup turn on channel. Stop Time: Setup turn off timer. Confirm: Setup turn off or turn on message. Start/Off: Setup turn on, turn off frequency.
ENGLISH TV Setting 1. 2. 3. 4. Channel: To display current channel number. Frequency: To display current channel frequency. Color System: To select TV broadcast system. Sound System: Select the sound system for a TV broadcast system.DK system shall be selected for most areas of Mainland China. 5. Auto Search: Used to scan all the TV channels and save to memory. The TV’s total number of channels is 199 (1-199).
OSD Menu in PC Mode This TV has a DVI-D digital interface (Through HDMI)and VGA analog interface, which can be switched using VGA input. Press the MENU button to enter into the OSD main menu. Adjustable items include: Picture Setting, Audio Setting, Setup Setting & VGA Setting DŽ ENGLISH Picture Setting 1. Contrast: Adjust black and white level, suitable contrast can make picture more lightly. Adjustment range is from 0 to 100. 2.
ENGLISH Sound Setting 1. 2. 3. 4. Volume: The Volume adjustment range is from 0 to 100, You can adjust the Volume of the picture to the level you prefer Balance: Adjust the balance between left/right channels as required using the left / right buttons. Smart Volume: To select the Automatic Volume Setup. (VGA Mode did not support this function) Sound Effect: You can choose your preferred sound effect mode. The selection including Off, News, Movie, Music, Surround, Stereo & User.
ENGLISH Setup Setting 1. Language: This indicates the different languages available for the OSD menu, including Chinese, & English. The default is Chinese 2. Wide Mode: To select picture size. Includes 2 modes: Full and 4:3. 3. Sleep Timer: Use this button to set a time period after which the TV will enter into standby mode. The time period can be 0>15>30>45>60>90>120 minutesDŽ(VGA Mode did not support this function) 4. Start/Off : To setup turn on and turn off time. 5.
ENGLISH VGA Setting 1. 2. 3. 4. 5. Clock: To adjust horizontal size. ( The function is only in VGA mode) Phase: To improve focus clarity and image stability. H. Position: Adjust horizontal position on screen. V. Position : Adjust vertical position on screen. Auto Setting: Auto fine tune to a best status on screen.
Other Information Product Speciation N3290w 31.
Troubleshooting Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow ENGLISH “Ghost ” or double image No power No TV picture *This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture.
• External influences such as lightning or static electricity may cause improper operation. In this case, operate the unit after first turning on the power of the LCD TV and the AVC System, or unplug the AC cord for 1 to 2 minutes, then re-plug again. Power is cut off suddenly • Is the sleep timer set in advance? • Is there no signal in PC mode or HDMI mode? • The internal temperature of the unit has increased. Remove any object blocking the vent or clean as necessary.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Telephone 800 820 3870 Email China www.viewsonic.com.cn service.cn@cn.viewsonic.com Hong Kong www.hk.viewsonic.com/support/ 852 3102 2900 service@hk.viewsonic.
Limited Warranty VIEWSONIC® LCD TV What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
ViewSonic ® Q41T4701709 1A
