Service manual

7. Mechanical
The following table defines the mechanical specifications of this product for both chassis and
cabinet.
Parameter Specification
Dimension
W/O stand
W=800mm, H=632.6mm and D=210mm
W=800mm, H=573.5mm and D=117.6 mm
Net Weight 17kg, 37.4 lb.
Gross Weight 21.3kg, 46.9 lb.
Net weight *without* stand 15.41kg, 33.97 lb.
Chassis Plastic Material ABS (ABS HB / ABS VO / PC+ABS/HIPS+MICA)
External Plastic Chassis
Components
N/A
Exterior Chassis
Color/Texture/Details
Refer to N3235WM Product ID
Chassis Component’s Color
Difference
Refer to N3235WM Color Guide
Chassis Color Drift Due to
UV-Light
The color drift due to UL-Light shall be less than 10 “Delta E” in the
1976 CIE L*a*b color space. Testing shall be performed according
to the requirements of ASTM Test Method D4459-93.
Molded Plastic Workmanship shall be inspected according to ViewSonic Molded
Plastic Parts Specification, VSCMPPSPEC001V1.2.
Screen Printed Parts, Bird
Logo Recess
Artwork shall be provided and confirmed by ViewSonic.
Rear Label A label identifying the product name, model/serial number and FCC
ID/Logo shall be placed into the rear label recess located on the rear
panel of the chassis.
Wall Mount 400mmx200mm VESA high hole (n=6), M6 X 10mm , pitch =1.0mm
screw mounting kit not included.
Sample Sample of textured color chips, plastic material specification, and
Material Safety Data Sheets shall be submitted to ViewSonic prior to
Mass Production Release.
In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable
gap between the buckets to bezel plastic pieces shall be within 1.5 mm. The maximum
acceptable gap between LCD panel and bezel shall be within 2.5 mm.
8. Environmental
Operating Temperature
0°C to +40°C
Humidity 0 ~ 65% non-condensing
Altitude 0 meter to +3000 meters above sea level
Storage Temperature
-20°C to +60°C
Humidity 0 ~ 90% non-condensing
Altitude 0 meter to 12,000 meters above sea level
ViewSonic Corporation Confidential - Do Not Copy N3235w-1M
8