User manual

User Manual of DS-8000-S Series Net DVR
Page 29 Total 115
Light control key: 【LIGHT/F1】;
Auxiliary device control key:【AUX/F2】
Adjust preset description
In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressing【REC/SHOT】key, and
press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. V1.4
firmware can support 128 preset number at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, press 【PLAY/AUTO 】key to start PTZ auto function. Press
【PLAY/AUTO】key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter into PTZ control mode again, and press【PLAY/AUTO】key to stop.
Exit PTZ contrl mode
Press【ESC】or【ENTER】to exit and return preview mode.