User manual

User Manual of DS-8000-S Series Net DVR
Page 15 Total 115
Chapter3 Operational Instructions
3.1 Front Panel
This picture is the front panel of DS-8000-S series Net DVR.
o n p q
r s t u
Index Type Name Description
1 IR receiver.
2 State
Lamps
1-8 Show channel 1-8 status. Green means recording; Red means
network transmission; Orange means recording and network
transmission. Lamp twinkle and red means the corresponding
HDD has error.
3 State
Lamps
9-16 Show channel 1-16 status. Green means recording; Red
means network transmission; Orange means recording and
network transmission.
4 POWER POWER Device switch with power indicator lamp. Green means DVR
is working; Red means DVR is powered off; No light means
no power is supplied.
5 State
Lamps
READY
STATUS
ALARM
MODEM
HDD
LINK
Tx/Rx
DVR is ready.
Green means you can use IR remote control.
Red means there is alarm.
Green means modem connection and dial-up successful.
Twinkle in red means reading or writing HDD.
Green means network is OK.
Twinkle in green means data is being transmitted.
6 Compound
Keys
MENU
ESC
PLAY
1. Switch preview mode into menu;
2. Brush control short key【WIPER】.
Cancel and back to parent menu.
1. Local playback;
2. 【AUTO】in PTZ mode.