User Guide

16
Making Connecons
This section guides you on how to connect the projector with other equipment.
Connecng to Power
Connect the power adapter to the USB-C Port on the side of the projector.
NOTE:
• Charge the projector for 2.5 hours via our included power adapter before
using it for the rst me.
• It’s recommended to use the included power adapter when using the
projector, especially when the projector is low on baery.
• The projector is compable with any 9V/2A power adapter or power bank
for baery charging and power on use.
• The projector supports both 5V or 9V charging. If you are not using our
included power adapter for charging, it will take longer than 2.5 hours to
reach full baery.
• To power on the projector, the power bank should be at least 18W (9V/2A)
and support Quick Charge (QC) protocol output.