User Guide

33
Setting the Presentation Timer
The presentation timer can indicate the presentation time on-screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1. Enter Basic > Presentation Timer menu.
2. Press [Enter] to show the Presentation Timer page.
3. Select Timer Period and press / to conrm the duration. Duration can be set to
1 to 5 minutes, with 1 minute increments, or 5 to 240 minutes. The options are 5, 10,
15, 20, 60, 120, 240 minutes.
Once the timer has been activated, resetting the timer interval will re-activate the timer.
4. Press  and select the Timer Display. Then press / to select whether to display
or hide the on-screen timer.
Selection Description
Always Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min Display timer on-screen in the last 1 / 2 / 3 minutes.
Never Hides the timer throughout the presentation time.
5. Press  and select Timer Position, and then press / to set timer location.
Top-Left

Bottom-Left

Top-Right

Bottom-Right
6. Press  to select Timer Counting Direction, then press / to select the required
timer method.
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0.
7. To activate Presentation Timer, press  and select Start Counting, then press /
to select Yes. The timer will start counting after exit the OSD menu.
To cancel the timer, perform the following steps:
1. Enter Basic > Presentation Timer menu.
2. Press  and select Start Counting.
3. Select No. The timer will stop counting after exit the OSD menu.