User Guide
Table Of Contents
- Key safety instructions
- Introduction
- Projector Positioning
- Connection
- Operation
- Activate the projector
- Using the menus
- Using the password function
- Setting a password
- If you forget your password
- Entering the password recall procedure
- Change Password
- Disabling the password function
- Switching input signal
- Changing HDMI input settings
- Adjusting the projected image
- Perform keystone correction
- Adjust four corners
- Zoom in to see details
- Selecting the aspect ratio
- About the aspect ratio
- Optimizing the image
- Fine-tuning of image quality in user modes
- Setting the Presentation Timer
- Hiding the image
- Locking control keys
- Light source settings
- Extending light source life
- Operations at high altitudes
- Using the CEC function
- 3D functions
- Control the projector through the local area network
- Control the projector with the web browser
- About Crestron e-Control®
- Using the projector under standby mode
- Switch off the projector
- Menu operations
- Description of each menu
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
- Appendix
7
Remote control
PatternAspect
PgUp
PgDn
Freeze Blank
On Off
HDMI 1 HDMI 2COMP
Source
Auto
Sync
Color
Mode
Network
9
0
4
4
6
8
10
11
9
3
7
5
4
12
15
16
17
18
19
23
24
4
20
21
22
26
25
27
13
14
28
1. On
Turn on the projector.
2.
COMP
Select the D-Sub / component display.
3. Auto Sync
Automatically verify the best picture
quality for the displayed image.
4.
Keystone button and direction
button
/ / /
Manually corrects distorted images
resulting from an angled projection.
Left/
Right/
Up/
Down
Selects the required menu item to
make adjustments.
5.
(Laser)
Emits a visible laser pointer
beam which can be used during
presentations.
6.
MENU
Open the OSD menu.
7.
Freeze
Freezes the projected image.
8.
Aspect
Selects the display aspect ratio.
9. 10. PgUp/PgDn
Connect the projector to a computer
with a Mini USB cable to operate the
display software (Microsoft PowerPoint)
running on a connected computer.When
the cursor mode is activated, these
buttons will reference the previous and
next functions.
11. (Volume)
Decrease the volume.
12. (Presentation Timer)
Brings up the Presentation Timer
settings menu.
13. Eco Mode
Displays the Lamp Mode option list.
14.
(Mute)
Toggles the projector audio between on
and off.
15.
Off
Turn the projector over.
16. 17. HDMI 2/HDMI 1
Select the source of the displayed
HDMI.
18. SOURCE
A source selection bar displays.