User Guide
Table Of Contents
- Safety Precautions
- Introduction
- Making Connections
- Using Your ViewBoard
- Powering On/Off your ViewBoard
- Initial Launch Setup
- vLauncher - Customizable Welcome Screen
- Tool Bar
- ViewBoard On-Screen Display (OSD) Menu
- Embedded Applications and Settings
- RS-232 Protocol
- Appendix
- Regulatory and Service Information
4040
Display Sengs
1. Press MENU on the remote control and select the Display menu.
2. Adjust the Brightness, Contrast, Hue, and Sharpness directly by touching and
adjusng each value. Addionally, you can use the remote control and press
DOWN/UP/LEFT/RIGHT to select a value, then press VOL+/VOL- to adjust it.
3. To adjust the display ecacy choose from: Standard, Bright, So, and Custom.
4. Touch the Standard, Cold, or Warm icon to adjust the color temperature.
5. Drag the blue light slider directly to adjust the blue light value.