User Guide
Table Of Contents
- Safety Precautions
- Introduction
- Making Connections
- Using Your ViewBoard
- Powering On/Off your ViewBoard
- Initial Launch Setup
- vLauncher - Customizable Welcome Screen
- Tool Bar
- ViewBoard On-Screen Display (OSD) Menu
- Embedded Applications and Settings
- RS-232 Protocol
- Appendix
- Regulatory and Service Information
24
Video Output Connecon
To output video via a display device:
1. Connect an HDMI cable to the HDMI IN port of your display device, and the other
end to the HDMI OUT port of your ViewBoard.
2. For audio, connect one end of an audio cable to your ViewBoard’s AUDIO OUT
port and the other end to your speakers.
3. Plug in the power cord of your ViewBoard, and turn on the rear-panel power
supply switch.
4. Press the
Power button on the right-hand side of the ViewBoard to turn the
screen on.
NOTE: The HDMI OUT port can output a resolution of 1920 x 1080 @ 60Hz.