User Guide
Table Of Contents
- Información de conformidad
- Información del Copyright
- 1. Inicio
- 2. Características de ViewBoard
- 3. Configuración de la pantalla
- 4. Funcionamiento básico de ViewBoard
- 5. Aplicación y configuración incorporada de ViewBoard
- 6. Resolución de problemas
- 7. Cuidado y mantenimiento
- 8. Modos de visualización
- 9. Especificaciones
- 10. RS-232 Protocol
- Otra información
87
26
27
28
29
2A
2B
RED ■ (F1) 2C
GREEN ■ (F2) 2D
YELLOW ■ (F3) 2E
BLUE ■ (F4) 2F
NOTE:
1. This IR-pass-through code is different from the RCU key code.
2. Special control sequence for POWER key under IR-pass through mode.
2-1. When Display is OFF and receives the IR POWER code: Display will turn itself
on, then forward the POWER code to the host via RS232.
2-2. When Display is ON and receives the IR POWER code: Display will forward the
POWER code to the host via RS232, then turn off itself.
2-3. When SET-POWER LOCK is enabled, the Display will not respond to POWER
key pressing.
3. The VOLUME UP and VOLUME DOWN code will repeatedly output when you
press and hold the keys.