Specifications

FM/AM radio
FM radio reception is weak or noisy.
There is multi-path interference.
Your area is too far from the FM station transmitter.
The noises may be caused by fluorescent lamps, motors,
AM radio reception is weak or noisy, thermostats, or other electrical equipment.
Radio stations cannot be selected automatically.
AM radio stations cannot be registered as
presets.
Your area is too far from the FM station transmitter.
The AM radio signal is weak.
Auto Preset has been used.
Adjust the FM antenna height or orientation, or place it in a different location.
Set "FM Mode" in the "Option" menu to "Mono" to select monaural FM radio
reception (p.80).
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.53).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Select the station manually (p.53).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.54).
USB and network
The USB device is not connected to the USB jack securely.
The file system of the USB device is not FAT16 or FAT32.
The data in the USB device is protected by the encryption.
Turn off the unit, reconnect your USB device, and turn the unit on again.
Use a USB device with FAT16 or FAT32 format.
The unit does not detect the USB device.
Folders and files in the USB device cannot be Use a USB device without an encryption function.
viewed.
Enable the DHCP server function on your router and set "DHCP" in the "Setup"
The network parameters (IP address) have not been obtained menu to "On" on the unit (p.98). If you want to configure the network parameters
The network feature does not function.
properly, manually, check that you are using an IP address which is not used by other
network devices in your network (p.98).
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.65).
The media sharing setting is not correct.
Some security software installed on your PC is blocking the access Check the settings of security software installed on your PC.
of the unit to your PC.
The unit and PC are not in the same network.
The unit does not detect the PC.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
APPENDIX • Troubleshooting En118