Specifications

SOURCE
)ut selection keys
Resetting remote control codes
You can reset a remote control code registered to each input
selection key.
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press the input selection key.
Use the numeric keys to enter "5098".
Once the remote control code is reset successfully, SOURCE blinks
twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
"_;_reset th_ remote eor_tre_ to f_etory default setth[fs
(_) Press CODE SET,
(_) Press RECEIVER.
(_3)Use the numeric keys to enter "9981".
CONFIGURATIONS • Controlling external devices with the remote control En1 12