Specifications

SOURCE
)ut selection keys
Clearing functions learned from other
remote controls
(RX-V773 [China, Korea, U.K. and Europe models] only)
Clearing the assignment for each key
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press one of the following keys to select the device
for which key assignments will be cleared.
For playback device: press the input selection key.
For TV: press TV ©.
Use the numeric keys to enter "9991".
Press the key that you want to reset.
Once the key assignment is cleared successfully, SOURCE
blinks twice.
If it blinks six times, clearing failed. Repeat from Step 2.
Repeat step 4 until all desired key assignments are
cleared.
Press CODE SET.
SOURCE blinks once.
Clearing the assignments for each input
source
2
3
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press one of the following keys to select the device
for which key assignments will be cleared.
For playback device: press the input selection key.
For TV: press TV ©.
Use the numeric keys to enter "9992".
Once the key assignment is cleared successfully, SOURCE
blinks twice.
If it blinks six times, clearing failed. Repeat from Step 1.
CONFIGURATIONS • Controlling external devices with the remote control En1 11