Specifications
SOURCE @
SOURCE
operation keys
operation keys
operation keys
TV ©
Programming from other remote controls
(learning)
(RX-V773 [China, Korea, U.K. and Europe models] only)
The remote control of the unit can receive remote control signals
from other remote controls and learn the remote control operation. If
you cannot find a remote control code for your playback device or if
any key on the remote control does not work after you register the
remote control code, use the learning function to assign a function
to each key.
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press one of the following keys depending on the
type of your device.
For playback device: press the input selection key
(corresponding to the input jacks where the device is
connected).
For TV: press TV ©.
Use the numeric keys to enter "9990".
Aim the infrared transmitters of the remote controls
at each other.
Remotecontrol of external device
5 to 10 cm apart
5
6
Perform the following steps within 10 seconds.
(_) On this unit, press one of the following keys to which you want to
assign a function.
For playback device: SOURCE @, menu operations keys,
external device operation keys
For TV: TV operation keys
(_) On the external device, press the key from which the operation is
learned.
Once the operation is learned successfully, SOURCE blinks
twice.
If it blinks six times, learning has failed. Repeat Step 5.
Repeat step 5 until all desired operations are
learned.
"7 Press CODE SET.
SOURCE blinks once.
Hot(=
• If you press RECEIVER in step 2, you can assign functions of an external
receiver to the menu operation keys, external device operation keys or
numeric keys. However, it makes these keys to control the unit impossible. If
you need to restore the remote control code for the unit, perform the following
steps.
@)Press CODE SET.
Press RECEIVER.
@)Use the numeric keys to enter "9992".
CONFIGURATIONS • Controlling external devices with the remote control En1 10