Specifications

SOURCE
RECEIVER
)ut selection keys
Externaldevice
operation keys
operation keys
operation keys
Registering the remote control codes for
playback devices
You can use the unit's remote control to operate playback devices if
you have registered their remote control codes. You can also use
the input selection keys to change the playback devices that are
controlled by the remote control, because their remote control
codes are assigned to the input selection keys.
• (RX-V673 and RX-V773 [U.S.A. and Canada models] only)
If you assign the remote control code for an external device to the star (*) key, you
can operate the device with the remote control without switching the input source
after pressing the star key.
• (RX-V773 [China, Korea, U.K. and Europe models] only)
You can also assign a function to each key using the learning function (p.110).
Use "Remote Control Code Search" in the CD-ROM
to find the remote control code for your playback
device.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
Press the input selection key.
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully, SOURCE
blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
• For details on how to register a remote control code to a SCENE key, refer to
"Configuring scene assignments" (p.46).
Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
By pressing SOURCE or RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit after pressing RECEIVER (lights up in
orange), and an external device after pressing SOURCE (lights up in green). For
example, if you register the remote control code of your external device on
TUNER, you can operate the unit's built-in FM/AM radio after pressing RECEIVER
and the external device after pressing SOURCE.
SOURCE d.b Turns on/off the playback device.
Cursor keys Select an item.
Menu operation ENTER Confirms a selected item.
keys
RETURN Returns to the previous screen.
DISPLAY Switches information on the display.
TOP MENU Displays the top menu.
POP-UP/MENU Displays the pop-up menu.
m Stops playback.
n Stops playback temporarily.
External device I_- Starts playback of the selected
operation keys song/video.
Searches forward/backward (by
holding down).
Numeric keys
TV operation keys
Skips forward/backward.
Enter numerical values.
Control the TV (p.108).
• These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
CONFIGURATIONS • Controlling external devices with the remote control En109