Specifications

IP Address Configures the network parameters (such as IP address). 98
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 98
Network
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 98
Network Name Edits the network name (the unit's name on the network) displayed on other network devices. 99
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the front display or TV screen. 99
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 100
Zone2 Set Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 100
Multi Zone
Zone Rename Changes tile zone name (for Zone2) displayed on the front display or TV screen. 100
(RX-V773 only) 100
Party Mode Set Enables/disables switching to the party mode.
Dimmer (Front Display) Adjusts the brightness of the front display. 100
Display Set Short Message Selects whether to display short messages on the TV screen when the unit is operated. 100
Wall Paper Selects the image to be used as wallpaper on the TV. 101
Function
Trigger Mode Specifies tile condition for the TRIGGER OUT jack to function. 101
Trigger Output
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 101
Memory Guard Prevents accidental changes to the settings. 102
Auto Power Down Sets the amount of time for the auto-standby function. 102
ECO
ECO Mode Enables/disables the eco mode (power saving mode). 102
Language Select an on-screen menu language. 103
CONFIGURATIONS • Configuring various functions(Setup menu) En 90