Specifications

D:\D\inter61a\INTERRUP.A Saturday, January 08, 2011 11:31 AM

Return: BH = border color (00h-3Fh)

Note: (see AX=1007h)

SeeAlso: AX=1001h

--------V-101009-----------------------------

INT 10 - VIDEO - READ ALL PALETTE REGISTERS AND OVERSCAN REGISTER (VGA)

AX = 1009h

ES:DX -> 17-byte buffer for palette register list (see #00018)

Return: nothing

Note: UltraVision v2+ supports this function even on color EGA systems in

video modes 00h-03h, 10h, and 12h; direct programming of the palette

registers will cause incorrect results because the EGA registers are

write-only. To guard against older versions or unsupported video

modes, programs which expect to use this function on EGA systems

should set the ES:DX buffer to FFh before calling.

SeeAlso: AX=1002h,AX=1007h,AX=CD02h

--------V-101010-----------------------------

INT 10 - VIDEO - SET INDIVIDUAL DAC REGISTER (VGA/MCGA)

AX = 1010h

BX = register number

CH = new value for green (0-63)

CL = new value for blue (0-63)

DH = new value for red (0-63)

Return: nothing

SeeAlso: AX=1012h,AX=1015h

--------V-101012-----------------------------

INT 10 - VIDEO - SET BLOCK OF DAC REGISTERS (VGA/MCGA)

AX = 1012h

BX = starting color register

CX = number of registers to set

ES:DX -> table of 3*CX bytes where each 3 byte group represents one

byte each of red, green and blue (0-63)

Return: nothing

SeeAlso: AX=1010h,AX=1017h,INT 62/AX=00A5h

--------V-101013-----------------------------

INT 10 - VIDEO - SELECT VIDEO DAC COLOR PAGE (VGA)

AX = 1013h

BL = subfunction

00h select paging mode

BH = 00h select 4 blocks of 64

BH = 01h select 16 blocks of 16

01h select page

-64-

http://www.foxitsoftware.com For evaluation only.