Specifications

D:\D\inter61a\INTERRUP.A Saturday, January 08, 2011 11:31 AM

current row

With PhysTechSoft's PTS ROM-DOS the BH, BL, and CX values are ignored

on entry.

SeeAlso: AH=08h,AH=0Ah,AH=4Bh"GRAFIX",INT 17/AH=60h,INT 1F"SYSTEM DATA"

SeeAlso: INT 43"VIDEO DATA",INT 44"VIDEO DATA"

--------V-100A-------------------------------

INT 10 - VIDEO - WRITE CHARACTER ONLY AT CURSOR POSITION

AH = 0Ah

AL = character to display

BH = page number (00h to number of pages - 1) (see #00010)

background color in 256-color graphics modes (ET4000)

BL = attribute (PCjr, Tandy 1000 only) or color (graphics mode)

if bit 7 set in <256-color graphics mode, character is XOR'ed

onto screen

CX = number of times to write character

Return: nothing

Notes: all characters are displayed, including CR, LF, and BS

replication count in CX may produce an unpredictable result in graphics

modes if it is greater than the number of positions remaining in the

current row

With PhysTechSoft's PTS ROM-DOS the BH and CX values are ignored

on entry.

SeeAlso: AH=08h,AH=09h,AH=11h"Tandy 2000",AH=4Bh,INT 17/AH=60h

SeeAlso: INT 1F"SYSTEM DATA",INT 43"VIDEO DATA",INT 44"VIDEO DATA"

--------V-100B--BH00-------------------------

INT 10 - VIDEO - SET BACKGROUND/BORDER COLOR

AH = 0Bh

BH = 00h

BL = background/border color (border only in text modes)

Return: nothing

SeeAlso: AH=0Bh/BH=01h

--------V-100B--BH01-------------------------

INT 10 - VIDEO - SET PALETTE

AH = 0Bh

BH = 01h

BL = palette ID

00h background, green, red, and brown/yellow

01h background, cyan, magenta, and white

Return: nothing

Note: this call was only valid in 320x200 graphics on the CGA, but newer

cards support it in many or all graphics modes

-57-

http://www.foxitsoftware.com For evaluation only.