Specifications

D:\D\inter61a\INTERRUP.A Saturday, January 08, 2011 11:31 AM
0 screen resolution (0 = 200 lines, 1 = 400 lines)
1 underline enable (if set, 'blue' of fg color = underline)
2 font (0 = Standard-8, 1 = HP-Roman-8)
3 memory disabled for CPU access
4 allow access to full 32K memory instead of wrapping at 16K
5 select second 16K page instead of first
6,7 unused
--------V-106F03-----------------------------
INT 10 - HP Vectra EX-BIOS - MODIFY MONITOR INFO
AX = 6F03h
BH = exclude mask (set bits are not modified)
BL = new values for bits indicated by BH (see #00190)
Return: AX destroyed
Notes: this function is only valid when an HP MultiMode Video Display Adapter
is installed
supported by original HP Vectra AT and by ES/QS/RS series Vectras
SeeAlso: AX=6F01h,AX=6F02h
--------V-106F04-----------------------------
INT 10 - VIDEO - Video7 VGA,VEGA VGA,HP Vectra - GET MODE AND SCREEN RESOLUTION
AX = 6F04h
Return: AL = current video mode (see #00191)
BX = horizontal columns (text) or pixels (graphics)
CX = vertical columns (text) or pixels (graphics)
SeeAlso: AX=6F05h
--------V-106F05-----------------------------
INT 10 - VIDEO - Video7 VGA,VEGA EXTENDED EGA/VGA,HP Vectra - SET VIDEO MODE
AX = 6F05h
BL = mode (see #00191)
Return: AX,BL destroyed
Notes: also supported by the HP Vectra Extended BIOS on the original
HP Vectra AT and by ES/QS/RS series Vectras
on the HP Vectra, this function rather than AH=00h must be used to
return to an IBM-standard mode after setting an HP-specified mode
from 08h to 0Fh.
SeeAlso: AH=00h,AX=0070h,AX=007Eh,AX=6F04h
(Table 00191)
Values for Video7/VEGA video mode:
text/ text pixel pixel colors disply scrn system
grph resol box resolution pages addr
00h-13h = standard IBM modes (see #00010 at AH=00h)
-204-
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.