Specifications

D:\D\inter61a\INTERRUP.A Saturday, January 08, 2011 11:31 AM
1Eh BYTE chroma information: green X
1Fh BYTE chroma information: blue Y
20h BYTE chroma information: blue X
21h BYTE chroma information: white Y
22h BYTE chroma information: white X
23h BYTE established timings 1 (see #00130)
24h BYTE established timings 2 (see #00131)
25h BYTE manufacturer's reserved timing or 00h for none
bit 7: 1152x870 @ 75 Hz (Mac II, Apple)
26h 8 WORDs standard timing identification
resolution (low byte) and vertical frequency (high byte) for
each of eight modes (see #00132)
X resolution = (lowbyte + 31) * 8
36h 18 BYTEs detailed timing description #1 (see #00133)
(v1.1) alternately, text identification (see #00135)
48h 18 BYTEs detailed timing description #2
(v1.1) alternately, text identification (see #00135)
5Ah 18 BYTEs detailed timing description #3
(v1.1) alternately, text identification (see #00135)
6Ch 18 BYTEs detailed timing description #4
(v1.1) alternately, text identification (see #00135)
7Eh BYTE unused???
7Fh BYTE checksum
(radix-complement: 256-low byte of 16-bit sum of 00h-7Eh)
Bitfields for DPMS EDID flags:
Bit(s) Description (Table 00128)
2-0 unused???
3 display type
=0 non-RGB multicolor
=1 RGB color
4 unused???
5 Active Off supported
6 Suspend supported
7 Standby supported
SeeAlso: #00127
Bitfields for DPMS input signal type:
Bit(s) Description (Table 00129)
0 separate sync
1 composite sync
-158-
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.