Specifications

D:\D\inter61a\INTERRUP.A Saturday, January 08, 2011 11:31 AM
BL = 01h
BH = new state (see #00111)
Return: AL = 4Fh if function supported
AH = call status
00h successful
else failed
SeeAlso: AX=4F10h/BL=00h,AX=4F10h/BL=02h,AX=A00Ch
(Table 00111)
Values for VESA VBE/PM power state:
00h On
01h standby
02h suspend
04h Off
08h reduced On (for flat screens)
--------p-104F10BL02-------------------------
INT 10 - VESA VBE/PM (Power Management) v1.0+ - GET DISPLAY POWER STATE
AX = 4F10h
BL = 02h
Return: AL = 4Fh if function supported
AH = call status
00h successful
BH = current power state (see #00111)
else failed
SeeAlso: AX=4F10h/BL=00h,AX=4F10h/BL=01h,AX=A00Dh
--------V-104F11-----------------------------
INT 10 - VESA VBE/FP (Flat Panel Interface) - API
AX = 4F11h
BL = function
00h installation check / get capabilities
other registers vary by function
Return: varies by function
--------V-104F12-----------------------------
INT 10 - VESA VBE/CI (Cursor Interface) - API
AX = 4F12h
BL = function
other registers vary by function
Return: varies by function
SeeAlso: AX=4F4Dh
--------s-104F13BX0000-----------------------
INT 10 - VESA VBE/AI (Audio Interface) - INSTALLATION CHECK
-145-
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.