EP5542/EP5542T Multimedia Digital Poster User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.
Thank you for choosing ViewSonic As a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Safety Precautions FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water.
CAUTION: Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the monitor. • If the monitor has been exposed to rain or water. • If the monitor has been dropped or the cabinet damaged. • If the monitor does not operate normally by following operating instructions.
Table Of Contents 1. Getting Started............................................................................................................................1 1.1. Package Contents................................................................................................................1 1.2. Fastening the poster............................................................................................................1 2. Parts and Functions.......................................................
Copyright Information Copyright © ViewSonic Corporation, 2020. All rights reserved. ViewSonic© and the three birds logo are registered trademarks of ViewSonic Corporation. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meetsthe ENERGY STAR® guidelines for energy efficiency.
Mul�media Digital Poster 數位多媒體廣告看板 1. Getting Started Quick Start Guide 1.1. Package Contents 快速使用指南 The following items are included in your product box. 1 EP5542/EP5542T Mul�media Digital Poster 數位多媒體廣告看板 Quick Start Guide 快速使用指南 1 2 For HDMI 1 For HDMI 2 HDMI 3 DP VGA 3 Switch 2 NOTE: The illustrations may differ slightly from the items shipped with your product. 1.2. Fastening the poster 120. 3 528 120.
Remote Sensor 3 1. U SB 1 (DC 5.0V/0.5A) USB for the poster. This USB port can’t not use for FW update. 2. USB 2 (DC 5.0V/0.5A) USB for the poster. This USB port can’t not use for FW update. 3. RJ45 Enable connection to cable and log on to Internet.
9 8 S/PDIF Main board 7 6 5 Main board Open the door with the key. NOTE: 1. C ut off power before opening the door. 2. Make sure that the door is locked before turning on power. 10 1 2 3 4 11 12 1. DP(DisplayPort) INPUT Connect an external device to DP out jack. 2. HDMI1/2/3 Input To connect with those equipments with HDMI or DVI interface. HDMI 3(ARC): Connect an ARC-enabled home theater receiver to this jack. 3. USB 2.0 Connect USB devices to this port for Android.
2. Parts and Functions 2.1. Remote Control INPUT Input source select 0-9 number buttons Input source information Power On/Off 1 2 3 4 5 6 7 8 9 INFO 0 ASPECT HOME EXIT Display desktop (Home page) OK Mute the sound MENU MUTE PICTURE Control buttons for USB multimedia playback VOL SOUND / /// Select sound mode Go to USB mode Freeze the screen Take a screenshot and store to USB drive or internal storage if no USB drive connected.
2.1.1. Installing remote control Batteries To install remote control batteries: 1. Open the battery cover. 2. Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3. Replace the cover. Battery precautions: Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
3. Connections • Turn off the display and connected device. • Check the plug type at the ends of cables. • Make sure the fastened connection. Network cable Network cable Serial port cable S/PDIF Main board Headphone cable S/PDIF cable PC, etc. Audio input devices Digital sound system Audio cable PC, etc. VGA devices PC, etc. VGA cable Audio cable USB cable USB cable USB cable HDMI cable HDMI cable HDMI cable HDMI devices USB devices DP devices DP cable VGA cable PC, etc.
4. Basic Operations 4.1. Turn on the display Plug the power cord and turn on the AC Power Switch. 4.2. First initiation The following installation menu will pop up for first-time power on. Select desired menu language. Press Next to go to the next page. Select your Time Zone, press Finish to finish the installation.
4.3. Home Menu Overview 1. Press HOME button to show desktop menu. 2. Use arrow and OK button for desired selection. 3. Press EXIT button to leave. Installed application list External USB storage web Browser. File manager Menu Mainly for network, Date &Time, and Language setting.
5. System Settings 1. Press button to select desktop menu option, press OK to confirm. 2. Press EXIT button to return to previous menu or exit the menu.
5.1. Home Menu Overview 1. Press button to select desktop menu option, press OK to confirm. 2. Press EXIT button to return to previous menu or exit the menu. Network setting Scanning WiFi signal Scanning WiFi direct device Setting Portable WiFi hotspot Enable/disable Miracast Plug the LAN-cable into the LAN-port, the Poster will be get an IP address automatically and connect to the internet.
5.2. Home Menu Overview 1. Press button to entry About and select System net update. System net update System net update can select (1) Auto Update: When display power off, system will auto check the new version from OTA server. If new version found, system will auto update. After update complete, sytem will turn off. (2) S et Schedule: User can set the update time. (3) M anual update: User can update the OTA package manually.
6. File Explorer 1. Press button to select desktop menu option, press OK to confirm. 2. Press EXIT button to return to previous menu or exit the menu. Click to entry file explorer Click to entry function menu Function Item Category selection Description Exit Click to exit file manager. Theme Click to change the theme. Settings Click to entry setting menu page.
Click to select storage Double click to open folder of file Item Description New Click to add file or folder. Search Click to search file or folder. Refresh Click to refresh file status. Cleaner Click to clean not necessary file. More Click to show more functions. Copy Click to copy file. Cut Click to cut file. Paste Click to paste file. Delete Click to delete file. Rename Click to rename file.
7. Menu List Picture Picture Mode Select your favourite picture mode for each input. Contrast Adjust the contrast. Brightness Adjust the brightness. Hue Adjust the image hue. (Only for NTSC system) Sharpness Adjust the sharpness. Saturation Adjust the color saturation. Flicker Free Turn on/off the Anti-Flicker function. Backlight Set up the overall brilliance of the screen. The Flicker Free select Off, you can set the level of the Backlight as your desired.
Setting Signal detection Select On to automatically recognition source. OSD turn off Select OSD menu display time. Data Display the date. Time Display the current time. Off Timer With Off Timer function On, the display will automatically turn off at a preset time. On Timer With On Timer function On, the display will automatically turn on at a preset source at a preset time. Highlight Period item, press or button to select Once, Everyday, Mon.~Fri., Mon.~Sat. or Sat.~Sun..
8. Using Auto Play 1. Copy media content to the root directory of a USB Flash drive. USB Flash drive should be formatted as FAT32. 2. Using the Poster remote control, press the Menu button. 3. Using the arrow buttons on the remote scroll to the right and select the Lock option. 4. Press OK to enter Lock menu 5. When prompted enter user the remote to enter the password (default standard user password is “0000” and super user is “2580”) 6. Scroll down to Auto Play and change the option to On.
9. Using USB multi media player • Insert the USB drive with mutimedia content including photo, movie and music. • Switch the input source to USB mode. Notes: • It is recommended that you back up your USB device data. • Please name your files in English. Otherwise the file names can not be shown correctly. • Some USB device may not be compatible with this display. USB multi media interface introduction Exit USB multi media Select browse format To select and play files from different sources.
9.1. Playing Photo Support photo (in JPG, BMP or PNG format). Previous photo Play/pause Next photo Notes: You can also use operate.
9.2. Playing Music Support music (in MP3 or AAC format). Previous song Pause/Play Next song Show information Show playlist Repeat mode select Repeat Mode repeat to play single music. repeat to play all music files in current folder when it plays to the end. no repeat when it plays to the end. Notes: For touch model, when the control bar disappears during playback, please touch the lower portion of the screen to show it up.
9.3. Playing Movie Support movie in MPG, MKV, DAT, MP4, MOV or VOB format. Previous movie Fast reverse Play/pause Fast forward Next movie Skip to specific point by input time Show playlist Show information Adjust the volume AB Section repeat Playing settings A-B repeat : Trun the Section Replay to On, then set starting point A and ending point B. No repeat: Turn the Section Replay to Off.
10.
Audio: Audio Codec Sample rate Channel MPEG1/2 Layer1 16KHz ~ 48KHz Up to 2 MPEG1/2 Layer2 16KHz ~ 48KHz Up to 2 MPEG1/2/2.5 Layer3 8KHz ~ 48KHz Up to 2 AAC, HEAAC 8KHz ~ 48KHz Up to 5.1 Bit Rate Container MP3 (.mp3) AVI (.avi) ASF (.asf) DivX (.divx) Matroska (.mkv, .mka) 3GPP (.3gpp, .3gp) MP4 (.mp4, .mov, m4a) 32Kbps ~ 448Kbps MPEG transport stream (.ts, .trp, .tp) MPEG program stream (.DAT, .VOB, .MPG, .MPEG) FLV (.flv) WAV (.wav) MP3 (.mp3) AVI (.avi) ASF (.asf) DivX (.
Audio Codec LPCM Sample rate 8KHz ~ 48KHz Channel Bit Rate Container WAV (.wav) AVI (.avi) Matroska (.mkv, .mka) 3GPP (.3gpp, .3gp) MP4 (.mp4, .mov, m4a) Mono, Stereo, 5.1 64Kbps ~ 1.5Mbps MPEG transport stream (.ts, .trp, .tp) MPEG program stream (.DAT, .VOB, .MPG, .MPEG) *Practically supported format will depend on the paid royalties.
11. Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your display, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Possible Solutions Remote control does not operate • The batteries could be weak. Replace the batteries. • Check the orientation of the batteries. • Make sure the power cord is plugged in.
12. Specifications Display: Model No. EP5542 Power Source AC 100-240 V, 50 / 60 Hz Current Max. Display panel EP5542T Visible screen size Number of pixels Dimensions (W × D × H) Net Weight 2.3A 2.3A 55 inches (diagonal) 55 inches (diagonal) 3,840 × 2,160 3,840 × 2,160 768.5 x 1870 x 450 mm 30.26 x 73.63 x 17.72 in 768.5 x 1870 x 450 mm 30.26 x 73.63 x 17.72 in 62.7 kg 138.23 lb 62.7 kg 138.
13. Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Website T= Telephone C = CHAT ONLINE Email Australia/New Zealand www.viewsonic.com.au AUS= 1800-880-818 NZ= 0800-008-822 service@au.viewsonic.com Canada www.viewsonic.com T= 1-866-463-4775 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/eu/support/call-desk/ Hong Kong www.
Limited Warranty ViewSonic® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
Mexico Limited Warranty ViewSonic® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.
31
