Service manual

30 Minutes
Set time before going to Sleep mode
= 30 Minutes
45 Minutes
Set time before going to Sleep mode
= 45 Minutes
60 Minutes
Set time before going to Sleep mode
= 60 Minutes
120 Minutes
Set time before going to Sleep mode
= 120 Minutes
Sleep
6. Adjust time range before going to sleep
mode. Time range = 30, 45, 60, 120
(Minutes) and Off.
7. Default = Off
8. When Sleep mode is triggered, the power of
monitor will be turned off.
9. Only active in HDMI Mode (both in AV&PC)
10. when selected item of SleepΔmake monitor
AC/DC OFF/ON,it will reset to off
11. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected sleep time setting
[Up]: Rolling up the slider
(When push the button on the top
position, the slider shall go down to the
bottom item
[Dn]: Rolling down the slider
(When push the button on the bottom
position, the slider shall go down to the
top item
Off
Disable Sleep mode.
Memory Recall
1. Background = blanking
2. Recall white balance to factory
setting
3. Recall all the OSD setting to the
default. (include the R/G/B in User
Color)
4. Show the message OSD position is
ʳ ʳ
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
71