Service manual

4:3
Change aspect ratio to 4:3ʳ
Aspect Ratio
3. Show on existing Aspect Ratio setting by red
color
2. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected Display Mode
setting.
[Up]: Scroll up the slider
(When push the button on the top
position, the slider shall go down to the
bottom item)
[Dn]: Scroll down the slider (When push the
button on the bottom position, the slider
shall go up to the top item)
3. Default = full screen
Note : 1.When input signals are wide
format, this function is disable.
2.When input signals are non-wide format.
this function is enable.
Full Screen 
Fill screen with panel native aspect
ratio.
ʳ
Display Mode
1. This function toggles RGB and YUV
RGB Mode
Set color space to RGB for PC timing
mode
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
65