Service manual

Vertical Position
1. Adjust range = 0 to 100
2. Key button definition:
[1]: Back to Manual Image Adjust
OSD
[2]: Change to Horizontal Position
OSD
[Up]: Increase the OSD value
setting
[Dn]: Decrease the OSD value
Horizontal Size
1. Adjust range = 0 to 100
2. Key button definition:
[1]: Back to Manual Image Adjust OSD
[Up]: Increase the OSD value setting
[Dn]: Decrease the OSD value
ʳ
Fine Tune
1. Adjust range = 0 to 100
2. Key button definition:
[1]: Back to Manual Image Adjust OSD
[Up]: Increase the OSD value setting
[Dn]: Decrease the OSD value
[Dn]: Scroll down the slider
(When push the button on the
bottom position, the slider shall
go down to the top item
2. Under Digital mode, all the H./V.
Position, Horizontal Size and Fine
Tune shall be disabled with gray
color. And it should not be
selected.
3. Under native mode, Sharpness
shall be disabled with gray color.
And it should not be selected.
4. Under SRGB mode, Dynamic
Contrast shall be disabled with
gray color. And it should not be
selected.
5. When move to Dynamic
Contrast, the right-bottom
side icon will change to “[ 2 ]:
;/”
Sharpness
ʳ
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
63