Service manual

DVI
Step 1: Turn off OSD.
Step 2:
1. Target video input port = Digital
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
Step 3: Show on Input Message OSD at the
right-top corner of screen for 1 second.
[Up]: Move up the slider
[Dn]: Move down the slider
HDMI PC
Step 1: Turn off OSD.
Step 2:
1. Target video input port = HDMI PC
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
Step 3: Show on Input Message OSD at the
right-top corner of screen for 1 second.
HDMI AV
Step 1: Turn off OSD.
Step 2:
1. Target video input port = HDMI AV
2. If signal detected from target port, change to
target port.
3. If no signal detected from target port, keep
existing input port.
4. When HDMI input and color space is YUV, it
will first detect HDMI AV
Step 3: Show on Input Message OSD at the
HDMI PC
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
59