Service manual

5. Adjustment Procedure

5.1 Key Function Description

Power Switch AC Power Switch on the back cover

Soft Power Switch on the front bezel

Power LED (Front Head) Blue – ON

Amber – Active Off

Dark = Soft Power Switch OFF

Front Panel Controls (Head)

[ 1 ] [ 2 ] [ ] [Ÿ] [ź]

[ ] Power

[ 1 ] Button 1

[ 2 ] Button 2

[Ÿ] Up arrow button

[ź] Down arrow button

Note: Power Button, Button 1 and Button 2 must be

one-shot logic operation. (i.e. there should be no

cycling)

Reaction Time OSD must fully appear within 0.5s after pushing

Button 1

5.2 Hot Key Operation

[1] Main Menu

(refer to segment 4-6-3)

[2] Input toggle (Analog or DVI or HDMI; refer to Appendix D)

[ź] To immediately activate Audio menu.

[Ÿ] To immediately activate Contrast menu. It should be change

to Brightness OSD by push button [2]

(refer to the Contrast OSD in segment 4-5-3)

*1 refer to the Brightness OSD in segment 4-5-3

*2 Under sRGB or DCR mode, this function is disable.

ˮϰ]

(Keep pushing 5 sec)

Under HDMI mode, toggle audio source between HDMI and

jack plug

ViewSonic Corporation

VX2433wm-1

VX2433wm-CN

CONFIDENTIAL – DO NOT COP