Service manual

3.10 NO SIGNAL FOR D-SUB / DVI

While no signal is detected for D-Sub and DVI, the following OSD message shall shows on 3 seconds then go in to

power saving.

OSD Background = Non-transparent

Image = Blanking

3.11 ACTORY DEFAULTS

Item Defaults Item Defaults

Contrast 70% OSD Time Out 15 Sec

Brightness 100% OSD Background On

Color Temperature 6500K Volume 80%

Sharpness 100% Treble N/A

OSD H. Position 50% Bass N/A

OSD V. Position 50% Input Priority Auto Search

720x400/640x400 720x400 Resolution Notice Enabled

ViewSonic Corporation

VX2433wm-1

VX2433wm-CN

CONFIDENTIAL – DO NOT COP