Service manual

5
Set OSD Time Out to 5 Seconds
15
Set OSD Time Out to 15 Seconds
30
Set OSD Time Out to 30 Seconds
OSD Time Out
1. Adjust range = 5, 15, 30, 60
2. Default = 15
3. Key button definition:
[1]: Back to Setup Menu OSD
[Up]: Increase the OSD value setting
[Dn]: Decrease the OSD value
setting
[Up]+[Dn]: Recall to default value
60
Set OSD Time Out to 60 Seconds
OSD Background
Swap on and off the OSD Background
; = Non-transparent
 = Transparent
ʳ
30 Minutes
Set time before going to Sleep
mode = 30 Minutes
45 Minutes
Set time before going to Sleep
mode = 45 Minutes
60 Minutes
Set time before going to Sleep
mode = 60 Minutes
120 Minutes
Set time before going to Sleep
mode = 120 Minutes
Sleep
1. Adjust time range before going to
sleep mode. Time range = 30, 45, 60,
120 (Minutes) and Off.
2. Default = Off
3. When Sleep mode is triggered, the
power of monitor will be turned off.
4. Only active in HD mode. Only active
in HDMI Mode (both in AV&PC)
5. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected sleep
time setting
[Up]: Rolling up the slider
Off
Disable Sleep mode.
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
29