Service manual

( faster than level 1)
4:3
Change aspect ratio to 4:3
Aspect Ratio
1. Show on existing Aspect Ratio
setting by red color
2. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected Display
Mode setting.
[Up]: Scroll up the slider
(When push the button on the
top position, the slider shall go
down to the bottom item)
[Dn]: Scroll down the slider (When
push the button on the bottom
position, the slider shall go up to
the top item)
3. Default = full screen
Note : 1.When input signals are
wide format, this function is
disable.
2. When input signals are non-wide
format. this function is enable.
Full Screen
Fill screen with panel native aspect ratio.
RGB Mode
Set color space to RGB mode for PC timing
mode
Display Mode
1. This function toggles RGB and YUV
display mode.
2. Show on existing Display Mode
YUV Mode
Set color space to YUV mode for HD timing
mode
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
24