Service manual

Change Color setting to 6500K
5000K
Change Color setting to 5000K
ʳ
Red
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Green OSD
[Up]: Increase the OSD value setting
[Dn]: decrease the OSD value setting
Green
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Blue OSD
[Up]: Increase the OSD value setting
[Dn]: decrease the OSD value setting
1. Show on existing input port by red
color
2. Default = 6500K
3. Key button definition:
[1]: Back to previous OSD status
[2]: Change to the selected color
setting
[Up]: Move up the slider
[Dn]: Move down the slider
4. Under DCR mode (Dynamic Contrast
= On), SRGB shall be disabled with
gray color. And it should not be
selected.
User Color
Jump to Red OSD directly
Blue
1. Adjust range = 0 to 100
2. Default = 100
3. Key button definition:
[1]: Back to Color Adjust OSD
[2]: Jump to Red OSD
ViewSonic Corporation
VX2433wm-1
VX2433wm-CN
CONFIDENTIAL – DO NOT COP
Y
20