Service manual

3. Front Panel Function Control Description

3.1 FRONT PANEL HARDWARE CONTROLS

Power Switch (Front Head) AC Power Switch on the back cover

Soft Power Switch on the front bezel

Power LED (Front Head) Blue – ON

Amber – Active Off

Dark = Soft Power Switch OFF

Front Panel Controls (Head)

[ 1 ] [ 2 ] [ ] [ź] [Ÿ]

[ ] Power

[ 1 ] BUTTON 1

[ 2 ] Button 2

[Ÿ] UP ARROW BUTTON

[ź] DOWN ARROW BUTTON

Note: Power Button, Button 1 and Button 2 must be

one-shot logic operation. (i.e. there should be no

cycling)

Reaction Time OSD must fully appear within 0.5s after pushing

Button 1

3.2 SHORT CUTS FUNCTION FROM THE BUTTON(S)

[1] Main Menu

[2] Input toggle (Analog or DVI or HDMI; refer to Appendix D)

[ź] To immediately activate Audio menu.

[Ÿ]

To immediately activate Contrast menu. It should be change to Brightness

OSD by push button [2]

(refer to the Contrast OSD in segment 4-5-3)

*1 refer to the Brightness OSD in segment 4-5-3

*2 Under sRGB or DCR mode, this function is disable

[ź]

(Keep pushing 5 sec)

Under HDMI mode, toggle audio source between HDMI and jack plug

When switch to HDMI

ViewSonic Corporation

VX2433wm-1

VX2433wm-CN

CONFIDENTIAL – DO NOT COP