Service manual

2.3 GENERAL SPECIFICATION

Test Resolution & Frequency 1920x1080 @ 60Hz

Test Image Size Full Size

Contrast and Brightness Controls

Factory Default:

Contrast = 70%, Brightness = 100%

2.4 VIDEO INTERFACE

Input Connector (refer the Appendix A)ʳ Analog = DB-15 (Analog)

Digital = DVI-D (Digital)

HDMI (Digital)

Default Input Connector Defaults to the first detected input

Video Cable Strain Relief

Equal to twice the weight of the monitor for five minutes

Video Cable Connector Pin out

Refer to Appendix A;

Compliant DDC/2B and DDC/CI

Video Signals

Video RGB (Analog)

Separate Sync / Composite Sync / SOG

TMDS (Digital)

Video Impedance 75 Ohms (Analog), 100 Ohms (Digital)

Maximum PC Video Signal 950 mV with no damage to monitor

Maximum Mac Video Signal 1250 mV with no damage to monitor

Sync Signals TTL

DDC 2B

Compliant with Revision 1.3;

The DDC communication shall not interrupt when power off.

DDC/CI

Compliant with Revision 1.1;

The DDC communication shall not interrupt when power off.

Digital link protection HDCP

Sync Compatibility Separate Sync / Composite Sync / SOG

Video Compatibility

Shall be compatible with all PC type computers, Macintosh

computers, and after

market video cards

480i / 480p @ 60Hz 576i / 576p @ 50Hz

Video timing support

(HDMI)

720p @ 50/60Hz 1080i / 1080p @ 50/60Hz

Resolution Compatibility Refer to Segment 4-5

Exclusions Not compatible with interlaced video

ViewSonic Corporation

VX2433wm-1

VX2433wm-CN

CONFIDENTIAL – DO NOT COP