Owners manual

13
5. Change your settings
Using the remote control:
1. Press [ ] MENU button to display the OSD
menu.
2. Press [
] [ ] [ ] or [ ] button to select its menu
item or to adjust its value. Press [OK] button to
conrm.
3. Press [
] EXIT button to go back to the
previous menu layer.
4. Press [
] MENU button to exit the OSD menu.
Using the display’s control buttons
1. Press [MENU] button to display the OSD
menu.
2. Press [▲] [▼] [+] or [-] button to choose menu
item or adjust its value.
3. Press [INPUT] button to conrm menu
selection and enter its submenu.
4. Press [MENU] button to exit the OSD menu.
5.1. Settings
5.1.1. Picture
Picture Mode
Select a predened picture setting.
Brightness
Adjust screen brightness.
Contrast
Adjust video contrast.
Color
Adjust the Color saturation of the picture.
Flicker Free
Panel setting to enable/disable icker free function.
Advanced settings
Access advanced settings such as tint settings
and video contrast settings.
• {Color temp.}: Change the colour balance.
• {Bluelightlter}: To reduce the blue light of
panel
• {Noise reduction}: Select the amount of
noise reduction for the picture.
• {Tint} Adjust to increase or decrease the
esh tone color.
• {Sharpness}: Adjust the sharpness of the
picture.
• {Dynamic contrast}: Dynamically enhance
the details in the dark, medium and light
areas of the picture.
• {Aspect ratio}: The pictures you receive
may be transmitted in 16:9 format (wide
screen) or 4:3 format(conventional screen).
• {Overscan}: Change the display area of the
image.
• {Backlight}: Adjust the brightness of this
display’s backlight.
Reset picture settings
Reset all your customized settings to the factory
defaults.