ViewSonic ® DSM3210 Digital Signage Multimedia - User Guide - Guide de l’utilisateur - Guía del usuario ViewSonic ® Model No.
Compliance Information .................................................................................. 1 Declaration of RoHS Compliance ................................................................... 2 Important Safety Instructions .......................................................................... 3 Copyright Information ...................................................................................... 4 Product Registration ................................................................
ENGLISH Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.1% < 0.1% 0.01% < 0.01% 0.
ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Digital Signage Multimedia” in this guide for further instructions. 7.
Copyright Information Copyright © ViewSonic Corporation, 2008. All rights reserved. ® Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice.
ENGLISH Antenna Installation Instructions 1.
Getting Started Congratulations on your purchase of a ViewSonic® Digital Signage Multimedia. Important! Save the original box and all packing material for future shipping needs. Your Digital Signage Multimedia package includes: • Digital Signage Multimedia • Remote Control with batteries • VGA HD-15 Cable • ViewSonic User Guide & Quick Start Guide • Power Cord Mounting ViewSonic Digital Signage Multimedia to the wall The Digital Signage Multimedia can be used in a free standing position or wall-mounted.
ENGLISH Front View of the Product 1 2 3 4 5 6 7 89 1 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. 2 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. 3 Menu Turn OSD menu ON/OFF. 4 CH Down Channel down when source is TV, or select a control while in OSD menu. 5 CH Up Channel up when source is TV, or select a control while in OSD menu. 6 ENTER To highlight a control in OSD menu.
A B C D E I H G F A SPDIF Optical output Connect this port to the SPDIF input of A/V device. B Cable/Air input jack Connect this port to RF/ CATV/ Digital cable. C Audio output Connect this port to your A/V device with audio in (RCA) connectors or to audio amplifier. D AV/ S-Video signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device. E YPbPr signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device.
ENGLISH Remote Control ViewSonic 9 DSM3210
Remote control button function as follow POWER Power ON/OFF 2 MTS Select Mono, Stereo or SAP sound 3 INFO Display current information 4 SOUND Select sound modes 5 SLEEP Set timer to turn off TV 6 FREEZE “Freeze-Frame” the current screen 7 ZOOM Adjust window size 8 0~9, - number button Directly channel select 9 VOL+ and VOL- Adjust volume UP/DOWN 10 GUIDE Show electronic program guide (EPG) 11 FAV.
Installation ENGLISH 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION • Only use the specified AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings.
3. Connecting to DVD / Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of Digital Signage Multimedia.
3) With YPbPr cable: YPbPr Cable (not supplied) ENGLISH Audio Cable (not supplied) VCR or DVD Player 4) With HDMI/ HDMI-DVI cable: (DVD Player should have the HDMI output terminal) VCR or DVD Player HDMI Cable (not supplied) Audio Cable (not supplied) (DVD Player should have the HDMI-DVI output terminal) VCR or DVD Player HDMI-DVI Cable (not supplied) ViewSonic 13 DSM3210
4. Connecting to External Stereo System to Listen to Digital Signage Multimedia Sound Connect the audio output terminal of the Digital Signage Multimedia to audio in terminal of the stereo system (stereo system sold separately). ENGLISH Audio Cable (not supplied) Stereo system 5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the Digital Signage Multimedia. (Headphone sold separately). Headphone (not supplied) 6.
7. Connecting to a Computer with HDMI-DVI cable Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the Digital Signage Multimedia. Also, Connect the Audio cable (green) from audio output of your Computer to the audio input terminal (green) of your Digital Signage Multimedia. ENGLISH PC PC Audio Connection (not supplied) HDMI-DVI Cable (not supplied) 8.
Basic Operation Turning on the Digital Signage Multimedia Before using the Digital Signage Multimedia: 1. Connect external equipment properly. 2. Insert the power plug, and the power LED indicator will light amber. Power On/Off To turn the Digital Signage Multimedia on/off: Press the POWER button under the Digital Signage Multimedia, or press the POWER button on your remote control to turn on/off the Digital Signage Multimedia. The power LED indicator lights blue when the Digital Signage Multimedia is on.
ENGLISH Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the ◄ or ► button to scroll up or down the channels. Each time you pause at a channel, the program list will update with the program schedule for that channel and the window will show the live program for that channel.
Freeze Picture Press FREEZE button to freeze picture. However, the sound still continues. Press FREEZE button again to restore. Using the OSD function You can use the OSD menus and options to adjust various settings by using the remote control. The basic operation is as following: • Press MENU to display OSD Menu. • Press ▲▼ to select your desired top Menu, and press ENTER or ◄► to enter the next level menu. • Use ▲▼ to select the control you want to adjust.
OSD Functions ADVANCED OPERATION — OSD MENU Video Menu — To adjust the picture quality ENGLISH In TV, AV, S-Video, YPbPr, HDMI source: Note: When in AV, S-Video, YPbPr or HDMI source,the TV option on the left does not appear. In VGA source: • Picture Mode: To select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright. • Brightness: To adjust luminance of video. (right: Max, left: Min.) • Contrast: To adjust contrast of video. (right: Max, left: Min.) • Color: To adjust color.
• Color Temperature: Press ENTER to select color temperature from User, Cool, Normal, ENGLISH and Warm. When Color Temperature is selected to User, the R, G, B Gain level can be adjusted separately. • Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. • VGA: Press ENTER to adjust VGA setting. ＊H. Position: To adjust the horizontal position of the picture. ＊V. Position: To adjust the vertical position of the picture.
ENGLISH In AV, S-Video, YPbPr, HDMI, VGA source: • Balance: To adjust left and right audio balance. • Bass: To adjust bass. • Treble: To adjust the treble. • Surround: To enjoy a concert hall effect, select “On” when stereo is playing. • Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave, Arena, or Church. • Equalizer: To select equalizer modes from Rock, POP, Live, Dance, Techno, Classic, Soft. • SPDIF Type: To select SPDIF Type from Dolby Digital, PCM, or Off.
• Auto Scan: To auto scan the TV and DTV channels. Press ENTER to start auto scanning ENGLISH Air and Cable TV channels. Press MENU again at any time to interrupt scanning. • Channel Skip: Press ENTER to skip the channel. To restore the channel, press ENTER again. • MTS: To select audio mode from Mono, Stereo, or SAP when available. • Audio Language: To select audio language from English, Spanish, or French.
ENGLISH In VGA source: • OSD Language: To select an OSD language from English, Spanish or French. • Aspect Ratio: To select image size between No scale, Normal, Full, Letterbox, Zoom, and Panorama. • Blue Mute: To set the background color to blue when there is no signal. • Time Setup: To set Time Zone, Time, Sleep Timer, and Auto Sleep. ＊Time Zone: To select the time zone appropriate to your location. ＊Time: To set the current time.
ENGLISH • Close Caption: To set close caption options. ＊Analog Closed Caption: To set basic analog closed caption options. (CC1~CC4, TEXT1~TEXT4, Off) ＊Digital Closed Caption: To select closed caption signal formats and set up caption modes for digital TV channels. (Service1~6, Off) ＊Digital Caption Style: Press ◄► to select Caption Style from “As Broadcaster” or “Custom”. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings.
Parental Menu — To set up Parental Control options ENGLISH It is active in all input sources; however, when in AV, S-Video, YPbPr, HDMI, or VGA source, the TV option on the left does not appear. Enter password and the screen below will show. (The default password is 0000.) • Channel Block: To block channels. Use ▲▼ to select the channel you want to block, and then press ENTER to block or unblock it.
ENGLISH • Program Block: To set TV and Movie Ratings. ＊Rating Enable: Choose “On” to enable the below settings. ＊U.S. TV Ratings: To adjust TV blocking level in the US. You can select between TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA. The TV Ratings in the US are defined as following.
The movie Ratings in the US are defined as following. G General audience R PG Parental guidance suggested NC-17 No one 17 and under limited PG-13 Parents strongly cautioned Restricted X Adult audience only ENGLISH Use ENTER button to block or unblock the ratings, and use MENU to exit. ＊Canadian English Ratings: To adjust blocking level in English-speaking region of Canada. You can select between C, C8+, G, PG, 14+, 18+. ＊The Canadian English Ratings are defined as following.
• Input Block: To set the input source to be blocked. Users will not be able to watch the ENGLISH content coming from the blocked input source. Use ENTER button to block the input source, and press ENTER again to unblock. • Change Password: To change the password, press ENTER, and the following screen appears. Enter the new password from the remote control, and then enter the new password again to confirm.
Other Information Specifications LCD Type ENGLISH Color Filter Glass surface Input signal RGB 31.5” TFT Active Matrix RGB 0.51075 (H) x 0.51075 (V) mm pixel RGB vertical stripe Anti-Glare Audio RGB analog (0.7/1.
No power • Make sure the Digital Signage Multimedia is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Blue LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture • The TV station may be experiencing problems. Try another channel. • The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
Customer Support For technical support or product service, see the table below or contact your reseller. ENGLISH Note: You will need the product serial number. Country/ Region Web Site T= Telephone F= Fax Email United States www.viewsonic.com T (Toll-Free) = 1-800-688-6688 T (Toll) = 1-424-233-2530 F = 1-909-468-1202 service.us@viewsonic.com Canada www.viewsonic.com T (Toll-Free) = 1-866-463-4775 T (Toll) = 1-424-233-2533 F = 1-909-468-1202 service.ca@viewsonic.
Limited Warranty VIEWSONIC® Digital Signage Multimedia How long the warranty is effective: ViewSonic Digital Signage Multimedia is warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2.
Mexico Limited Warranty VIEWSONIC® Digital Signage Multimedia ENGLISH What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.P: 83140 Tel: 01-66-22-14-9005 E-Mail: disc2@hmo.megared.net.
ViewSonic ®
