Owners manual

25
NOTE: This item is functional for VGA input only.
The options are:
• {1024x768 / 1280x768 / 1360x768 /
1366x768}
• {1400x1050 / 1680x1050}
• {1600x1200 / 1920x1200}
• {Auto}: Determines the resolution
automatically.
The selected settings will become effective after
turning off the power and turning it on again.
IR control
Select the operation mode of the remote control
when multiple displays are connected via an
RS232C connection.
• {Normal} - All displays can be operated
normally by the remote control unit.
• {Primary} - Designate this display as the
primary display for remote control operation.
Only this display can be operated by the
remote control. (In primary mode, IR key will
always be processed regardless the monitor
id).
• {Secondary} - Designate this display as the
secondary display. This display can not be
operated by the remote control, and will only
receive the control signal from the primary
display via the RS232C connection.
• {Lock All} / {Lock all but Volume} / {Lock
all but Power}/{Lock all except PWR &
VOL} - Lock the remote control function of
this display.
NOTE: To unlock IR control, press and hold the
[Info] button on the remote control for more 6 (six)
seconds.
Keyboard control
Choose to enable or disable the display keyboard
(control buttons) function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock
all but Power}/{Lock all except PWR &
VOL} - Disable the keyboard function.
NOTE:
“Keyboard Control Lock Mode” This function
completely disables the access to all Keyboard
Control functions. To enable or disable the
keyboard control lock, press both [VOL+]and [UP]
buttons and hold down continuously for more than
3 (three) seconds.
Tiling
With this function you can create a single large-
screen matrix (video wall) that consists of up
to 225 sets of this display (up to 15-sets on the
vertical and 15-sets on the horizontal sides). This
function requires a daisy-chain connection.
Tiling
H monitor

1

V monitor

1

Position

1

Frame comp.

No

Enable

No

Switch on delay

Off

Example: 2 x 2 screen matrix (4 displays)
H monitors = 2 displays
V monitors = 2 displays
1 2
3 4
H MONITORS
V MONITORS
Position
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
1 2
6 7
3 4
8 9
5
10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
H MONITORS
V MONITORS
Position
• {H monitors} - Select the number of
displays on the horizontal side.
• {V monitors} - Select the number of
displays on the vertical side.
• {Position} - Select the position of this
display in the screen matrix.
• {Frame comp.} - Choose to turn the frame
compensation function on or off. If selected
{Yes}, the display will adjust the image to
compensate for the width of the display
bezels in order to accurately display the
image.