Owners manual

24
5.1.6. Config2 menu
OSD turn off
OSD H-position
OSD V-position
OSD transparency
Information OSD
Logo
Monitor ID
Heat status
Monitor information
DP version
Configuration 2
Advanced option
Off
10 Sec
On
1
Action
Action
DP 1.1
45
50
50
OSD turn off
Set the period of time the OSD (on-screen display)
menu stays on the screen.
The options are: {0 ~ 120} seconds.
NOTE: {0} does not disappear automatically.
OSD H-position
Adjust the horizontal position of the OSD menu.
OSD V-position
Adjust the vertical position of the OSD menu.
OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100
Information OSD
Set the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {Off} selection.
The options are: {1 ~ 60} seconds.
Logo
Choose to enable or disable the picture of Logo
when turn on your display.
NOTE: Logo will NOT rotate with rotation setting/
detection.
Monitor ID
Set the ID number for controlling the display via
the RS232C connection.
Each display must have a unique ID number when
multiple sets of this display are connected. Monitor
ID number range is between 1 to 98.
Heat status
This function allows you to check the thermal
status and fan speed of the display at any time.
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.
DP version
DisplayPort support mode.
The options are:
• {DP 1.1}: DP 1.1 single stream (clone
mode).
• {DP 1.2 SST}: DP 1.2 Single stream (clone
mode).
• {DP 1.2 MST}: DP 1.2 Multi-Stream
NOTE: The DP version must be set the same for
all daisy chain displays.
Window selection
Select the window for adjusting setting. The
selected window will be highlight green border.
Window selection will set to Main after power on.
The options are: {Main}, {PIP}
Rotation
Set the rotation of Main/Sub/OSD
Language
Select the language used in the OSD menu.
The options are: {English}/{Deutsch}/{
简体中
文
}/{Français}/{Italiano}/{Español}/{Pyccкий}/
{Polski}/{Türkçe}/{
繁體中文
}
QR Code
Display QR code of Viewsonic website for more
information.
Conguration2reset
ResetallsettingsinConguration2menutothe
factory preset values.
5.1.7. Advanced menu
Input resolution
IR control
Keyboard control
Tiling
Off timer
Date and time
Schedule
HDMI with One Wire
Auto signal detection
Power save
Configuration 2
Advanced option
Auto
Action
Action
Action
Off
Action
Action
Off
Action
Mode 1
Input resolution
Set the resolution of the VGA input. This is only
required when the display is unable to detect the
VGA input resolution correctly.