Owners manual

20
5. OSD Menu
An overall view of the On-Screen Display (OSD)
structure is shown below. You can use it as a
reference for further adjusting your display.
Navigating the OSD menu using the remote
control:
1. Press the [
] MENU button to display the OSD
menu.
2. Press [
] [ ] [ ] or [ ] button to select its menu
item or to adjust its value. Press OK button to
conrm.
3. Press [
] EXIT button to go back to the
previous menu layer.
4. Press [
] MENU button to exit the OSD menu.
Navigating the OSD menu using the display’s
control buttons:
1. Press the MENU button to display the OSD
menu.
2. Press the [
] [ ] [ ] or [ ] to select menu item
or adjust its value.
3. Press [INPUT]buttontoconrmmenuselection
and enter its submenu.
4. Press MENUtoconrmmenuselectionand
enter its submenu.
5.1. Settings
5.1.1. Picture menu
Brightness
Contrast
Sharpness
Black level
Tint
Color
Noisereduction
Gamma selection
Color temperature
Color control
70
50
50
50
Medium
Native
Native
Picture
Screen
Audio
PIP
Configuration 1
Brightness
Adjust the overall image and background screen
brightness.
Contrast
Adjust the image contrast ratio for the input signal.
Sharpness
Adjust the sharpness of the picture.
Black level
Adjust the image brightness for the background.
NOTE: sRGB picture mode is standard and cannot
be changed.
Tint
Adjust the tint of the screen.
NOTE: VIDEO mode only.
Color
Adjust the color of the screen.
NOTE: VIDEO mode only
Noise reduction
Adjust the noise reduction level.
Gamma Selection
Select a display gamma.
NOTE: sRGB picture mode is standard and cannot
be changed.
Color Temperature
adjust the color temperature.
Color Control
The color levels of red, green, and blue are
adjusted by the color bars.
R: Red gain, G: Green gain, B: Blue gain
Picture Mode
PC mode: {Standard} / {Highbright} / {sRGB}.
Video mode: {Standard} / {Highbright} /
{Cinema}.